Choosing you solder \ brazing material
Posted: Mon Jun 20, 2011 5:34 pm
This is very interesting reading, I used the benzomatic solder and was putting to much heat into it and had problems when using the t8000 torch. Switched to brazing, needs more heat but I found it heaps easier but it's a little ugly to look at (used it for the coldfinger so not a concern for me)
I have done next to nothing with copper so I was glad to find this when the bloke at the welding supply place put me onto it.
I'm not advocating a particular brand this is just good reading when it talks about solder content and the PhosCopper etc
I have done next to nothing with copper so I was glad to find this when the bloke at the welding supply place put me onto it.
I'm not advocating a particular brand this is just good reading when it talks about solder content and the PhosCopper etc