Glass measuring cylinder and funnel.

Parrots beaks, valves, condensers, and all other hardware for stilling.

Glass measuring cylinder and funnel.

Postby Bastow » Sat Feb 08, 2014 2:09 pm

I recently purchased a 250ml and 1000ml measuring cylinder and a glass funnel. I thought I'd show off.
Cheers, Bastow.
You do not have the required permissions to view the files attached to this post.
Bastow
 
Posts: 20
Joined: Tue May 22, 2012 9:50 pm
equipment: 2'' Boka on 50lt keg, using Boka head as potstill. Home made voltage controller.

Re: Glass measuring cylinder and funnel.

Postby Bastow » Sat Feb 08, 2014 2:12 pm

The cylinders and both good quality, but the funnel is a bit rough. I dont know what happened with the orientation, they are saved right way up.
Bastow
 
Posts: 20
Joined: Tue May 22, 2012 9:50 pm
equipment: 2'' Boka on 50lt keg, using Boka head as potstill. Home made voltage controller.

Re: Glass measuring cylinder and funnel.

Postby Yummyrum » Sat Feb 08, 2014 2:15 pm

Very nice indead ....but watch those measuring cylinders they are easily knocked and don't survive the fall.. ;-)
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: Glass measuring cylinder and funnel.

Postby Bastow » Sat Feb 08, 2014 2:19 pm

Yeah I bet yum! I will probably make a little stand for all the glassware out of some pine boards I have laying around.
Bastow
 
Posts: 20
Joined: Tue May 22, 2012 9:50 pm
equipment: 2'' Boka on 50lt keg, using Boka head as potstill. Home made voltage controller.

Re: Glass measuring cylinder and funnel.

Postby Brendan » Sat Feb 08, 2014 3:12 pm

Good stuff mate. I have the same 250ml graduated cylinders, but broke one in the sink last week :doh:

They are great for measuring with hydrometers/alcometers :handgestures-thumbupleft:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: Glass measuring cylinder and funnel.

Postby zombie » Sat Feb 08, 2014 3:22 pm

Damn... Now I have to buy more stuff.
zombie
 

Re: Glass measuring cylinder and funnel.

Postby mymumsaidimcool » Sat Feb 08, 2014 3:23 pm

like the funnel... and the 1ltr tube... accurate measuring of ml/min to get l/hr
mymumsaidimcool
 
Posts: 148
Joined: Wed Jan 29, 2014 10:58 pm
Location: Melbourne West, Victoria
equipment: FSD pot still + 1 sight glass & bubble plate (more to come) 50l Keg boiler

Re: Glass measuring cylinder and funnel.

Postby Yummyrum » Sat Feb 08, 2014 6:40 pm

Good thinking MMSIC :handgestures-thumbupleft:
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: Glass measuring cylinder and funnel.

Postby mymumsaidimcool » Sat Feb 08, 2014 8:12 pm

Bastow wrote:I recently purchased a 250ml and 1000ml measuring cylinder and a glass funnel. I thought I'd show off.
Cheers, Bastow.


purchased online or was it local hbs or something?

Yummyrum wrote:Good thinking MMSIC :handgestures-thumbupleft:


and since it's glass it is relatively safe given you dont drop it :))
mymumsaidimcool
 
Posts: 148
Joined: Wed Jan 29, 2014 10:58 pm
Location: Melbourne West, Victoria
equipment: FSD pot still + 1 sight glass & bubble plate (more to come) 50l Keg boiler

Re: Glass measuring cylinder and funnel.

Postby Bastow » Sat Feb 08, 2014 11:06 pm

Yeah purchased online.
Bastow
 
Posts: 20
Joined: Tue May 22, 2012 9:50 pm
equipment: 2'' Boka on 50lt keg, using Boka head as potstill. Home made voltage controller.

Re: Glass measuring cylinder and funnel.

Postby mymumsaidimcool » Sun Feb 09, 2014 11:47 am

EBay or specific site?
mymumsaidimcool
 
Posts: 148
Joined: Wed Jan 29, 2014 10:58 pm
Location: Melbourne West, Victoria
equipment: FSD pot still + 1 sight glass & bubble plate (more to come) 50l Keg boiler

Re: Glass measuring cylinder and funnel.

Postby MacStill » Sun Feb 09, 2014 11:50 am

mymumsaidimcool wrote:EBay or specific site?


Quite a few on ebay mate ;-)

ebay glass funnel

:handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Glass measuring cylinder and funnel.

Postby Bastow » Sun Feb 09, 2014 12:25 pm

I got all of it from Labdirect. And cheaper than ebay too. 120ml just fits in a spirit bottle ( Laphroaig) but fits into a wine bottle perfectly. The quality of the funnel is lacking a bit but the measuring cylinders are excellent. I paid $127 delivered for the lot. $27 of that was postage and if your in Sydney you can negate that cost by going to Weatherill park.
Bastow
 
Posts: 20
Joined: Tue May 22, 2012 9:50 pm
equipment: 2'' Boka on 50lt keg, using Boka head as potstill. Home made voltage controller.

Re: Glass measuring cylinder and funnel.

Postby Sam. » Sun Feb 09, 2014 2:10 pm

:text-+1: for lab direct :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Glass measuring cylinder and funnel.

Postby mymumsaidimcool » Sun Feb 09, 2014 2:30 pm

Bastow wrote:I got all of it from Labdirect. And cheaper than ebay too. 120ml just fits in a spirit bottle ( Laphroaig) but fits into a wine bottle perfectly. The quality of the funnel is lacking a bit but the measuring cylinders are excellent. I paid $127 delivered for the lot. $27 of that was postage and if your in Sydney you can negate that cost by going to Weatherill park.



Lovely! Thanks mate ill get me one of those 1ltr measuring tubes... Only got 100ml so far, not bad but bigger is always better haha

:text-thankyoublue:


Given the funnel isn't the best I'll shoot over to eBay... Cheers mac for the link... Good not having to search for shit all the time :))
mymumsaidimcool
 
Posts: 148
Joined: Wed Jan 29, 2014 10:58 pm
Location: Melbourne West, Victoria
equipment: FSD pot still + 1 sight glass & bubble plate (more to come) 50l Keg boiler

Re: Glass measuring cylinder and funnel.

Postby hillzabilly » Sun Feb 09, 2014 2:51 pm

Good kitchen ware stores sometimes carry glass or ceramic funnels ,worth a try if the misses takes ya shopping.cheers hillzabilly
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Re: Glass measuring cylinder and funnel.

Postby mymumsaidimcool » Sun Feb 09, 2014 5:23 pm

Hahaha no missus mate. Gotta do my own shopping.. When mum doesn't lol :))
mymumsaidimcool
 
Posts: 148
Joined: Wed Jan 29, 2014 10:58 pm
Location: Melbourne West, Victoria
equipment: FSD pot still + 1 sight glass & bubble plate (more to come) 50l Keg boiler

Re: Glass measuring cylinder and funnel.

Postby Andy » Sun Feb 09, 2014 5:57 pm

i cut the top off a beer bottle for a little funnel, a port bottle for a wide funnel. because im cheap, but mainly because I break things (the port one is already broken)
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: Glass measuring cylinder and funnel.

Postby Yummyrum » Sun Feb 09, 2014 6:15 pm

Andy wrote:i cut the top off a beer bottle for a little funnel, a port bottle for a wide funnel. because im cheap, but mainly because I break things (the port one is already broken)

Andy,
Although I really like tje look of the Bastows funnel, I also have long pockets too so can you please do a workshop on :handgestures-thumbupleft: how to cut the bottles to make your own funnel....sure it will be mich appreciated.
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: Glass measuring cylinder and funnel.

Postby hillzabilly » Sun Feb 09, 2014 7:51 pm

they used to sell these on tv http://www.ktel.com/classics_products.php?id=17 .cheers hillzabilly
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Next

Return to Accessories



Who is online

Users browsing this forum: No registered users and 6 guests

x