Aussiedistiller, Home Distilling, Moonshine, Home Brew

Made this some time ago, just for something different and had to satisfy a brain fart lol. It's pretty much, three liebigs, with reservoirs on the ends.

How is knockdown power?

I run gas, so cant say what power. But lower than my 500mm x 4 1/2" shotgun. I should have made it a bit longer.

bluc wrote:How is knockdown power?

should be slightly better than a 3 core shotgun?

Doesn't make sense isn't it just a short tank either end wouldn't it be less effective than a 3 core shotgun. Which has cooling liquid full length?

bluc wrote:Doesn't make sense isn't it just a short tank either end wouldn't it be less effective than a 3 core shotgun. Which has cooling liquid full length?

not if the passive cooling on the colums is cooler than the warm surrounding water would be.

Ok interesting cheers :-B

Hey Googe. :greetings-waveyellow: Long time no see.
Weren't you making an adjustable RC at some stage? Did it work?

Looks like a lot more effort than a shotgun.
All a shotgun dose is reduce the length of a leiberg.
Ie instead of having a 2m leiberg you can have a 500m 4core shotgun condenser.

It has water running through the entire length bluc. Gday bushy, nice to see you mate. I've thought about adjustable ones but never built one lol.

That looks awesome googe! You got some skills at brazing copper to ss. Flawless joints from what I can see.

I've never seen anyone use a plate for a flange either, and having those vapor tubes exposed before it enters the leibig looks wicked! Might be getting a little aroused!

Thanks mate. should have explained in more detail, lazy lol. It's not ss, it's copper nickel for the outer jackets, shines up nice and looks similar to ss in the right light. I used to get it for nothing at my last job, it's used in ship building. I hadn't welded anything in the pics, there just assembled pics, I soft soldered it all up afterwards, was probably the most challenging soldering I've ever done, lots of swear words involved :)). I like the end plate flange, was such a simple solution it's so easy!. This one has been scraped now, I tend to build and recycle lol. I am planning a bigger and better one in the very distant future.

How thick is the end plate flange?

I'd call it a Liebig revolver

I make all my plates etc using flattened 2" wtdist, from.memory it's 1.2~1.6mm?. Others on other sites refered to it as a gatlin double uj, but it's not lol.

Might have been Yummy. Never Mind. Good to see ya dude.
So what's to gain with yr shotgun mod?

Haha seems like way more effort than its worth, but it looks bloody fantastic! :handgestures-thumbupleft:

Bushy wrote:Might have been Yummy. Never Mind. Good to see ya dude.
So what's to gain with yr shotgun mod?

G'day bushy iirc it was yummy that had that idea. :handgestures-thumbupleft:

Yep, was yummy!. No gain bushy, just some fun :handgestures-thumbupleft: