6" ideas

This area is to be used for submitting plans, referencing and conversations related to building stills and accessories.

6" ideas

Postby Monkey Handler » Fri May 28, 2021 5:08 pm

Hi all,
So I'm getting a stupid amount of 6" stainless pipe (I've got 3x 3m lengths at my disposal) and need some ideas for a possible future build/s. When I say future, I mean well further down the track, well well, as in maybe beyond hobby (obviously legit).
I was thinking of a 6" CM type build, maybe:
A 3m length, cut into managable lengths (I'm thinking 500mm) sections. Tri clamp ferrules welded either side just for practicality and make it modular. A slotted type plate welded on the bottom of each section, with copper packing on the bottom of a few sections, then what ever packing media ontop. Slotted section to help with weight management of the packing. Then a reflux condenser ontop (thinking a double helix type design?), with a 1 inch take off (with ball valve etc) going to a PC?
Any other ideas, thoughts, suggestions?
Monkey Handler
 
Posts: 23
Joined: Sun Mar 29, 2020 6:28 am
equipment: T500 copper reflux. 2" Pelican Pot, 4" 5 plate glasser, 500mm packed section with all copper goodies.
30L and 58L keg boiler

Re: 6" ideas

Postby Clickeral » Fri May 28, 2021 5:28 pm

Got a boiler big enough and enough power to run a 6" setup?

I am always for a modular bubble plate setup (removable plates) with packed sections etc means you can run multiple different configurations

But powering 6" can be fun as well as having a big enough boiler (100L plus would be my thoughts)
Clickeral
 
Posts: 262
Joined: Mon May 06, 2013 6:54 am
Location: Victoria
equipment: 5 Hectoliters of Fermenting space (120L temp controlled)
8 Plate modular procap bubbler with 510mm stainless packed section and super reflux condenser
50L Milk can boiler 2x 2400w
3v nanobrewery mashing

Re: 6" ideas

Postby Monkey Handler » Sat May 29, 2021 5:37 am

If I ever get around to using it, then that'll all be sorted, yes. As silly as it sounds, I'd just hate to see that pipe go to waste :-|
Monkey Handler
 
Posts: 23
Joined: Sun Mar 29, 2020 6:28 am
equipment: T500 copper reflux. 2" Pelican Pot, 4" 5 plate glasser, 500mm packed section with all copper goodies.
30L and 58L keg boiler

Re: 6" ideas

Postby bluc » Sat May 29, 2021 9:44 am

6 inch bubbler :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8156
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: 6" ideas

Postby Sam. » Mon May 31, 2021 12:02 pm

6" packed section won't work too well, have a search for "channelling"
Sam.
Site Admin
 
Posts: 10400
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.


Return to Hardware Research & Development



Who is online

Users browsing this forum: No registered users and 4 guests

cron

x