Page 2 of 2

Re: My first build...

PostPosted: Tue Jul 14, 2020 8:26 pm
by chipboy
And get onto flea bay where citric is cheap, I am lusting over 1 kg of it for less than $20.

Re: My first build...

PostPosted: Thu Jul 16, 2020 9:07 am
by Rumblepants
Sam. wrote:
5% Citric acid solution in hot water will do the trick


Thanks heaps!

Re: My first build...

PostPosted: Sun Sep 06, 2020 1:01 pm
by Stryda
Hey Rumblepants, sorry mate I haven’t been on here in a while but what Sam said, 5% should do it, I didn’t really measure it out when I did it but it would of been at least 5%. I looked around and ended up finding it at The Source Bulk Foods for about $6 per kilo. :handgestures-thumbupleft:

Re: My first build...

PostPosted: Sun Sep 06, 2020 1:06 pm
by Stryda
WhiskeySour wrote:I'm also building something similar, it seems Lesgold has inspired a few of us!
Reading this post has given me a kick in the arse to get mine finished, hit a brick wall on 1/4in for my easy flanges and the condenser coil. Going to have to do some digging


Hey Whiskey, did you find any 1/4inch yet? I got a coil off eBay for a good price, I’ll see if I can find the link and pm it to you if you want?

Re: My first build...

PostPosted: Mon Sep 07, 2020 7:59 am
by WhiskeySour
G'day Stryda. Thanks for the offer, I ended up finding a Tradelink that would cut and sell by the metre so I didn't have to buy the full 30m roll. He gave me trade price too so it worked out reasonable, although still probably the most expensive part of my build!
Got enough to make all my easy flanges and have about 3.5m left for the coil which I am yet to make (have just been running cfw in pot mode for now)

Re: My first build...

PostPosted: Sun Jan 03, 2021 11:05 am
by dalethewhale
G'day Stryda,

A little late but, Could you elaborate a little on the heating elements you installed please?

Type, Wattage, the fitting of them, the leads, the circuit considerations of your house. Your mum's maiden name... you know the usual.
Thanks in advance,
Whale