dogbreathe vodka wrote:Couldn't you do the drain internally?
Would look neater.
http://aussiedistiller.com.au/viewtopic.php?f=36&t=2408
This is Macs
DBV
Petulance wrote:I wanted to stick to a narrow riser. This will put a fair amount of pressure into the keg, and force a harsh bubbling through the exit leg of the riser.
Maybe I need to make it a bit wider.
MacStill wrote:Petulance wrote:I wanted to stick to a narrow riser. This will put a fair amount of pressure into the keg, and force a harsh bubbling through the exit leg of the riser.
Maybe I need to make it a bit wider.
If you force too much vapour speed into your thumper you could actually be making life hard to balance the rest of the column throughout the run, try to avoid restricting the vapour path too much if possible or you could end up with a pig of a still to run.
dogbreath vodka wrote:Hey Kimbo
So what height did you make your riser and downcomer?
DBV
Return to Hardware Research & Development
Users browsing this forum: No registered users and 52 guests