Re: Weldless 4 inch keg ferrule....
Posted: Fri Jun 12, 2020 7:17 pm
Or oval internal nut :O)
https://aussiedistiller.com.au/
RC Al wrote:Bit of a necro post..
The simple fact is you need a hole bigger than the 4" ferrule to get the nut in, on a standard keg this limits you to a 1" bsp nut, and impossible without welding for anything bigger
If you had a milk can or existing 6" opening fine, a ss 4" bsp nut starts at around $50, I dare say you wouldnt get much change out of $150-200 for the whole thing, makes welding look pretty attractive