Stripping Column

[TheMechwarrior]

Can anyone here draw up the electrical diagram for the control box for this? I'm not electrical engineering savvy.

I have a sparky who can do the work for me but he needs to know what I want him to do, since he has no idea what this is or what its trying to do.
Initially I'll plug 2 x 15A 220V 3600W (7.2kW total) elements to drive this.

I still need to buy a suitably sized control box and I'll need plugs/adapters for the control box to suit the items below.
Open to suggestions for the best/convenient plug/connection types.



I dropped the pressure control loop and replaced it with a temperature control loop.

Parts list:

1. Digital PID Temperature Controller D1S-CR-220 4-20mA+Relay 100-240VAC
2. Digital PID Temperature Controller D1S-2R-220 relay output + relay alarm output
3. Digital PID Temperature Controller D1S-VR-220 SSR output + relay alarm output
4. RTD PT100 Temperature Sensors 1/2” NPT Threads with Detachable Connector
5. RTD PT100 Temperature Sensors 1/2” NPT Threads with Detachable Connector
6. RTD PT100 Temperature Sensors 1/2” NPT Threads with Detachable Connector
7. SSR-40LA 4-20mA to AC28-280V 40A Single Phase SSR Solid State Relay w Cover
8. 125mmx70mmx50mm Single-phase Solid State Relay SSR Heat Sink Dissipation
9. Single Phase Solid State Relay SSR-40AA 40A 150-350VAC 24-480VAC w Heat Sink
10. 110-220V To DC 12V 24V LED Strip Light Switch Power Supply Driver Transformer
11. 110-220V To DC 12V 24V LED Strip Light Switch Power Supply Driver Transformer
12. DC 12V 30W 0142 Motor High Pressure Diaphragm Water Self Priming Pump 3L/Min

Cheers,

Mech.

[Meatheadinc]

Hi mech

I used a Bunnings first Aid Cabinet for my controller. ( as per Olddog) as it seemed to be the cheapest and easiest solution
http://www.bunnings.com.au/sandleford-3 ... x_p6101363

proper electrical boxes are much more expensive.

Metal bodied XLR mic plugs (3 pin) have served me well and are easy to connect/disconnect. similar are also available in 2,4,5 and 6 pin. Ebay are far cheaper than local suppliers.

What is your power source ?

[TheMechwarrior]

Damn your control box looks sexy!

For power I have 415V & 220V 3phase as well as 220v single phase.

[Meatheadinc]

Thanks mech

How many amps do you have on single phase ?

is this build to be used in a commercial operation ? if so, what are the requirements for explosion avoidance ?