Hey All From Vic
Posted: Sat May 26, 2012 9:43 pm
Just a quick shout out to every one on the forum. I used to stalk this forum and HD and i think its about time to get back into the game. I had lots of success with UJSM and a kind of All bran/corn flake washes. Soon i will be getting my ass into gear and will be throwing together a bok. I allready have 2.5m of 2.5inch copper, a 2200 watt heating element and an unlimed supply of 50 l kegs.
I am now thinking of going with gas for a heat source. Which leaves me to the problem of a coil ( I cant be assed, and dont have the time to make one) and where to get ss flanges and a needle valve from. Any help would be much aprieceated.
I was also considering making the bok head attach to a 1 m extension via ss flanges. So total length would be 1.5 m. In theory i could just use the head and open the needle valve fully and have a almost pot still like function for stripping. then attach the head to the 1 m (packed) extension and use this for low wines.
Any way i have learnt so much from the fourms in the past and hopefully i can offer some help to people now my self. The only problem is time......
To sum it up 1)Who makes coils???
2)A sorce for ss nedle vales and ss flanges.
3) Should i just skip the Bok idea and go for a vm type still
I am now thinking of going with gas for a heat source. Which leaves me to the problem of a coil ( I cant be assed, and dont have the time to make one) and where to get ss flanges and a needle valve from. Any help would be much aprieceated.
I was also considering making the bok head attach to a 1 m extension via ss flanges. So total length would be 1.5 m. In theory i could just use the head and open the needle valve fully and have a almost pot still like function for stripping. then attach the head to the 1 m (packed) extension and use this for low wines.
Any way i have learnt so much from the fourms in the past and hopefully i can offer some help to people now my self. The only problem is time......
To sum it up 1)Who makes coils???
2)A sorce for ss nedle vales and ss flanges.
3) Should i just skip the Bok idea and go for a vm type still