2 inch triclover fitting and clamp

This is a forum developed for people looking for distilling hardware, here is where you should post links and information as to where we can find stuff on the net or in your local area.

2 inch triclover fitting and clamp

Postby NoHope » Tue Jan 16, 2024 1:52 pm

I have a 50 litre milk an boiler from FSD and would like to be able to connect a garden hose to the outlet when I need to drain it, could someone send me a link as to where I could get it from I think the hose fitting is 1/2 inch bsp any help is greatly appreciated
NoHope
 
Posts: 80
Joined: Sun Jun 05, 2022 2:49 pm
Location: Northern NSW
equipment: T 500 25Ltr Boiler
4inch modular pot still
50 litre milk can boiler

Re: 2 inch triclover fitting and clamp

Postby Puk » Tue Jan 16, 2024 2:38 pm

Puk
Site Donor
 
Posts: 55
Joined: Sat May 20, 2023 9:28 am
equipment: 50l keg boiler (2x 2400w 5 star elements , 4" fill port, 3/4" removeable drain and ball valve)
Alcoengine pot still

Re: 2 inch triclover fitting and clamp

Postby The Stig » Tue Jan 16, 2024 3:29 pm

Sorry but Puk is incorrect.
The 50L milk can has a 1" drain valve, this is what youll need:
1 x https://5stardistilling.com/product/1-f ... hose-tail/
1 x https://5stardistilling.com/product/1-tri-clamp/
1 x https://5stardistilling.com/product/1-s ... lamp-seal/
I hope this helps
Cheers
The Stig
Site Nerd
 
Posts: 18517
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: 2 inch triclover fitting and clamp

Postby Puk » Tue Jan 16, 2024 7:22 pm

Whoops, sorry. He had mentioned a 2" triclover, so I went with that.
I might leave the advice to the experts. :oops:
Puk
Site Donor
 
Posts: 55
Joined: Sat May 20, 2023 9:28 am
equipment: 50l keg boiler (2x 2400w 5 star elements , 4" fill port, 3/4" removeable drain and ball valve)
Alcoengine pot still

Re: 2 inch triclover fitting and clamp

Postby NoHope » Wed Jan 17, 2024 6:17 pm

My bad if I had of looked more closely I would’ve seen the correct size will order through FSD the correct size just had a Homer Simpson moment thanks for the help
NoHope
 
Posts: 80
Joined: Sun Jun 05, 2022 2:49 pm
Location: Northern NSW
equipment: T 500 25Ltr Boiler
4inch modular pot still
50 litre milk can boiler

Re: 2 inch triclover fitting and clamp

Postby MattSmith » Thu Jan 18, 2024 10:29 am

Won't he need a TC ball valve as well?
MattSmith
Site Donor
 
Posts: 66
Joined: Tue Dec 20, 2022 9:53 pm
Location: Sydney, NSW
equipment: FSD 50L Milk Can
FSD 4" pot (3" PC) with packed section & RC
Still Spirits Air Still

Re: 2 inch triclover fitting and clamp

Postby The Stig » Thu Jan 18, 2024 11:28 am

MattSmith wrote:Won't he need a TC ball valve as well?

Nope, he already has one as part of the 50L milk can kit/setup
The milk can has this attached https://5stardistilling.com/product/1-t ... all-valve/
Last edited by The Stig on Thu Jan 18, 2024 11:30 am, edited 1 time in total.
The Stig
Site Nerd
 
Posts: 18517
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: 2 inch triclover fitting and clamp

Postby MattSmith » Thu Jan 18, 2024 11:33 am

I guess newer ones are different. Mine has a spout that's part of the valve. It doesn't come off (not that I can see anyway).
MattSmith
Site Donor
 
Posts: 66
Joined: Tue Dec 20, 2022 9:53 pm
Location: Sydney, NSW
equipment: FSD 50L Milk Can
FSD 4" pot (3" PC) with packed section & RC
Still Spirits Air Still

Re: 2 inch triclover fitting and clamp

Postby The Stig » Thu Jan 18, 2024 12:06 pm

That’s the old style :handgestures-thumbupleft:
The Stig
Site Nerd
 
Posts: 18517
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy


Return to Distillers Warehouse



Who is online

Users browsing this forum: No registered users and 1 guest

x