Page 1 of 1
2 inch triclover fitting and clamp
Posted:
Tue Jan 16, 2024 1:52 pm
by NoHope
I have a 50 litre milk an boiler from FSD and would like to be able to connect a garden hose to the outlet when I need to drain it, could someone send me a link as to where I could get it from I think the hose fitting is 1/2 inch bsp any help is greatly appreciated
Re: 2 inch triclover fitting and clamp
Posted:
Tue Jan 16, 2024 2:38 pm
by Puk
Re: 2 inch triclover fitting and clamp
Posted:
Tue Jan 16, 2024 3:29 pm
by The Stig
Re: 2 inch triclover fitting and clamp
Posted:
Tue Jan 16, 2024 7:22 pm
by Puk
Whoops, sorry. He had mentioned a 2" triclover, so I went with that.
I might leave the advice to the experts. :oops:
Re: 2 inch triclover fitting and clamp
Posted:
Wed Jan 17, 2024 6:17 pm
by NoHope
My bad if I had of looked more closely I would’ve seen the correct size will order through FSD the correct size just had a Homer Simpson moment thanks for the help
Re: 2 inch triclover fitting and clamp
Posted:
Thu Jan 18, 2024 10:29 am
by MattSmith
Won't he need a TC ball valve as well?
Re: 2 inch triclover fitting and clamp
Posted:
Thu Jan 18, 2024 11:28 am
by The Stig
MattSmith wrote:Won't he need a TC ball valve as well?
Nope, he already has one as part of the 50L milk can kit/setup
The milk can has this attached
https://5stardistilling.com/product/1-t ... all-valve/
Re: 2 inch triclover fitting and clamp
Posted:
Thu Jan 18, 2024 11:33 am
by MattSmith
I guess newer ones are different. Mine has a spout that's part of the valve. It doesn't come off (not that I can see anyway).
Re: 2 inch triclover fitting and clamp
Posted:
Thu Jan 18, 2024 12:06 pm
by The Stig
That’s the old style :handgestures-thumbupleft: