ok guys. definitely building a glasser. they just look too good.
95% sure I wanna go perforated plate to keep costs down compared to building bubble caps.
question is, what size holes should I drill, and what sort of plate open space should I aim for? from my reading, im getting anywhere between 5 and 20% open. I was planning on around 7.5% just to hit some sort of middle ground. and holesize is completely up in the air. from 1.5 to 6 depending who you read, and some even suggesting different sized holes on each plate (which im open to)
are there any hard and fast rules. initially i'll only be making neutral.
cheers