dogbreath vodka wrote:warramungas wrote:
I'm looking for the coupla times a year running method.
looks like you have your answer then :handgestures-thumbupleft:
Storage wont be too much of an issue. My supply of 2.5L laboratory bottles just keeps increasing.
Wait until you start running the 6", lab bottles will start looking reeeeeeal small. :laughing-rolling:
Shopping time! :teasing-tease:
TheMechwarrior wrote:I'll use anything up to 10+kW for heat up if I'm in a rush and then back off to 2.4 or 3.6 or 4.8 or 7.6kW depending on what I'm doing.
warramungas wrote:
Sounds like a 6" will be my selection then.
How much power do you guys normally pump into them to max them out or get a good run out of?
TheMechwarrior wrote:I'll use anything up to 10+kW for heat up if I'm in a rush and then back off to 2.4 or 3.6 or 4.8 or 7.6kW depending on what I'm doing.
TheMechwarrior wrote:I'll use anything up to 10+kW for heat up if I'm in a rush and then back off to 2.4 or 3.6 or 4.8 or 7.6kW depending on what I'm doing.
TheMechwarrior wrote:Thanks bigcam, tis a wee bit chilly down here.
2 x 3.6kW (15A each) or 2 x 2.4kW (10A each), either way it's all good. The extra power is only useful in getting you to the starting point sooner. 4.8kW will be plenty fine mate.
I'm running a 100L boiler.
Now go do some 5 Star Store shopping :handgestures-thumbupleft:
Cheers,
Mech.
warramungas wrote:Sounds like a 6" will be my selection then.
Zak Griffin wrote:Just a note here guys, a 6" bubbler and ~100L boiler is about as big as we want to condone here for a hobby still...
I realise the time constraints, wanting to build an ageing stock etc, but as DBV said a rig like that will produce more piss than any man could possibly drink if run more than a few times a year.
Cheers.
Return to Plated Column Stills
Users browsing this forum: No registered users and 26 guests