Modular bubbler

Perforated & bubble cap plated columns

Re: Modular bubbler

Postby MacStill » Thu Jul 19, 2012 8:51 am

No my wash stalled but I thought it was done, I must've knocked the plug for the electric blanket :angry-banghead:

Hopefully in a couple of days it'll be ready :?
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby MacStill » Tue Jul 24, 2012 8:00 pm

OK had a cunt of a day and needed some stress relief and shed time with a few rums this arvo, so I got the hammer & jigsaw out to do a bit of damage :laughing-rolling:

Ended up with this :D

P7242105.jpg


P7242106.jpg


I'm going to mount a metal panel where the draws were and put in a fancy dual element voltage controller :dance: look out Panda I'll be onto you :D

Thanks for the free cabinet and bench top kimbo, you're a legend dude :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby Panda » Tue Jul 24, 2012 8:12 pm

haha, that is as cool as a cucumber.
Panda
 
Posts: 225
Joined: Thu Dec 29, 2011 5:11 pm
Location: SE QLD
equipment: T500 & CM with pot head.

Re: Modular bubbler

Postby emptyglass » Tue Jul 24, 2012 9:12 pm

Nice!
emptyglass
 

Re: Modular bubbler

Postby Kimbo » Tue Jul 24, 2012 10:32 pm

McStill wrote:Thanks for the free cabinet and bench top kimbo, you're a legend dude :handgestures-thumbupleft:

any time mate, tiz the least i could do ;-)
looks the ducks nuts too BTW :handgestures-thumbupleft:
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: Modular bubbler

Postby R-sole » Wed Jul 25, 2012 4:58 am

Gather the gas is going when the lectric is all mounted up?


Looks flash
R-sole
 
Posts: 0
Joined: Mon Apr 18, 2011 4:15 am
Location: Northern NSW Australia
equipment: Keg based pot stiller. 3" vm for occasionally making product for macerations and redistillation.

Re: Modular bubbler

Postby MacStill » Wed Jul 25, 2012 5:24 am

I havnt been using gas for a while mate, dont think I'll ever go back now either....... it'll look flasher when the posty shows up :D
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby LWTCS » Fri Jul 27, 2012 8:37 am

LWTCS wrote:Did you run it yet Mac?,,,,,,,,,,That and lemme star at yer avatar for a second or two. :D

:whistle:
LWTCS
 
Posts: 126
Joined: Sun Dec 11, 2011 10:03 am
equipment: 52 liter primary boiler
Quad thumping system
4500 watt W/100% variable controller

Re: Modular bubbler

Postby MacStill » Fri Jul 27, 2012 8:52 am

LWTCS wrote:
LWTCS wrote:Did you run it yet Mac?,,,,,,,,,,That and lemme star at yer avatar for a second or two. :D

:whistle:


:handgestures-thumbdown: :angry-banghead:

Neutral spirit run today through a borrowed 3" boka (thanks Cavey)

Piss up tonight

piss up tomorrow night

So maybe sunday if I dont damage myself too much :laughing-rolling:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby LWTCS » Fri Jul 27, 2012 9:10 am

Well good luck and god speed.
LWTCS
 
Posts: 126
Joined: Sun Dec 11, 2011 10:03 am
equipment: 52 liter primary boiler
Quad thumping system
4500 watt W/100% variable controller

Re: Modular bubbler

Postby MacStill » Sun Jul 29, 2012 11:39 pm

Sorry Larry, I spent today on the couch :snooty:

Two big nights in a row & I'm fukt.... getting old I s'pose :laughing-rolling:

Will have something to report by weeks end :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby LWTCS » Thu Aug 09, 2012 10:49 am

McStill wrote:Sorry Larry, I spent today on the couch :snooty:

Two big nights in a row & I'm fukt.... getting old I s'pose :laughing-rolling:

Will have something to report by weeks end :handgestures-thumbupleft:


Ah don't mind me...i'll just dust up this corner here,,,and oh look a little dust there,,,,lemme wipe that up there and,,,,oh hey look ,,,,bouncing boobies! :dance:
LWTCS
 
Posts: 126
Joined: Sun Dec 11, 2011 10:03 am
equipment: 52 liter primary boiler
Quad thumping system
4500 watt W/100% variable controller

Re: Modular bubbler

Postby MR-E » Wed Aug 22, 2012 3:48 am

LWTCS wrote:
McStill wrote:Sorry Larry, I spent today on the couch :snooty:

Two big nights in a row & I'm fukt.... getting old I s'pose :laughing-rolling:

Will have something to report by weeks end :handgestures-thumbupleft:


Ah don't mind me...i'll just dust up this corner here,,,and oh look a little dust there,,,,lemme wipe that up there and,,,,oh hey look ,,,,bouncing boobies! :dance:


:teasing-poke: :!!
MR-E
 
Posts: 373
Joined: Tue Jun 12, 2012 4:58 pm
Location: Brisbane
equipment: Cooking on gas,50ltr keg, 3"Bok &
4" column with 6 perf plates

Re: Modular bubbler

Postby MacStill » Wed Aug 22, 2012 8:18 am

Oh :hand:

I've run it a few times now just as I normally would have & I'm pretty happy so far, I havnt been tempted to load the thumper right up yet.... maybe today :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby MacStill » Thu Oct 18, 2012 4:20 pm

Over the last couple of weeks I've made some minor improvements to my still too, I think it looks heaps better now :D

PA182174.JPG
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby Gas on » Thu Oct 18, 2012 4:28 pm

Nice setup there looks much better now you gotten rid of the chrome plated condenser & brass sight glass kits. :teasing-neener: :handgestures-thumbupleft: :handgestures-thumbupleft:

:laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling:

I second that! Ahhh a straight shotgun, no more shooting to the side! 8-} 8-} Did you change the plumbing setup too?
Gas on
 
Posts: 356
Joined: Sun Jun 19, 2011 11:51 pm
Location: perth sor
equipment: baked beans & rum

arfa 5 star bubbler

Re: Modular bubbler

Postby MacStill » Thu Oct 18, 2012 10:16 pm

I might be biased but it is the "best" bubbler I've ever seen posted anywhere, and it has another special inbuilt feature being that it wont rust :D
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby Goldie » Fri Oct 19, 2012 12:26 am

Gas on wrote:Nice setup there looks much better now you gotten rid of the chrome plated condenser & brass sight glass kits. :teasing-neener: :handgestures-thumbupleft: :handgestures-thumbupleft:

:laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling:


I second that! Ahhh a straight shotgun, no more shooting to the side! 8-} 8-} Did you change the plumbing setup too?
Goldie
 
Posts: 422
Joined: Fri Mar 23, 2012 12:22 am
Location: SOR Perth, WA
equipment: 4" four perf plate column on a 100lt SS boiler, 2" Pot Still on 50lt keg boiler

Re: Modular bubbler

Postby MacStill » Fri Oct 19, 2012 8:46 am

The plumbing is still pretty much the same mate, it's something I'm looking at improving further tho :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Modular bubbler

Postby MacStill » Fri Oct 19, 2012 6:43 pm

Precision Distilling Equipment

:D

IMG_0924.JPG
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

PreviousNext

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 51 guests

x