Aussiedistiller, Home Distilling, Moonshine, Home Brew

After all this time I have a plan. Yes another glasser, the reason why I have gone a glasser other than a conventional coulmn is I love the look of them and they're very visual.
I have started with some parts and begun building, this won't be a fast build due to time and funds ect ect. But its a build I look forward to.
As well as the bubbler I will be building a keg boiler.
I look forward to watching the current builds take shape also, good luck fellas.


So the plan is...
4" from keg to tri clamp then first plate,
5X plates 1x for neutrals, plates will be 150mm diameter with 1X 2" cap, 3/4 dc and 1" or 1 1/4 up comber ( haven't decided yet)
5X glasses
6X SS M8 rods
100mm 7X 3/4 tubes rc
500mm packed section
And most likely a block head for botanicals
2" pc with 7X 1/2 tubes
To a parrot.
Here's some pics

And some more. Also check out my hole saw. Some poor bastard droped a whole case in the middle of the road, and me being such a good citizen picked it up.. :laughing-rolling:

Nice work rummy all plates in one hit :handgestures-thumbupleft:

I love the mandatory safety shoe shot, :laughing-rolling: :laughing-rolling:

Yep, mind the hairy toes, weekends is the only time they get to breath fresh air 8-}

Rummys moving up in the world! Nice work there mate :handgestures-thumbupleft:

Thanks guys. ;-)

Good stuff mate.

Looking at that pic of the plates on my phone, I thought you were making each plate out of 10mm copper sheet haha

Nice going. Look forward to following your progress :handgestures-thumbupleft:

1 2many wrote:I love the mandatory safety shoe shot, :laughing-rolling: :laughing-rolling:

I think you need a pair of these in case you drop some copper :laughing-rolling:

Zak Griffin wrote:Good stuff mate.

Looking at that pic of the plates on my phone, I thought you were making each plate out of 10mm copper sheet haha

Haha I wish :laughing-rolling: wouldn't that be sturdy :laughing-rolling:

I like those wt, :laughing-rolling: next model up from my bottle cap opener thongs

WTDist wrote:Nice going. Look forward to following your progress :handgestures-thumbupleft:

1 2many wrote:I love the mandatory safety shoe shot, :laughing-rolling: :laughing-rolling:

I think you need a pair of these in case you drop some copper :laughing-rolling:

pyffh31150351132.jpg

Nice work mate. :laughing-rolling: :laughing-rolling: :laughing-rolling:

rumdidlydum wrote: :laughing-rolling: next model up from my bottle cap opener thongs

Never want a bottle opened from a thong that has stepped in dog shit :puke-huge:

Why the slots in the downcomers ? I thought slots were for risers only in caps?

Slots in the DC cups won't hurt... They're not necessary though.

Yeah direct the stream and they look better than plain ones in my opinion.

WTDist wrote:Nice going. Look forward to following your progress :handgestures-thumbupleft:

1 2many wrote:I love the mandatory safety shoe shot, :laughing-rolling: :laughing-rolling:

I think you need a pair of these in case you drop some copper :laughing-rolling:

pyffh31150351132.jpg

:text-offtopic: :text-offtopic: sorry but I need a pair of these let me know where I can get a pair. :laughing-rolling:

Maybe can sort out a group buy :techie-ebay: :laughing-rolling:

looking awesome mate, :handgestures-thumbupleft:
you're probably going pip me at the post at the rate your going.

Good start to ya build mate

count me in on ya group buy for the saftey pluggas mate keen as

Zak Griffin wrote:Slots in the DC cups won't hurt... They're not necessary though.

Cheers i thought as much i understand why mac has it on his stills with the whole mould thing seems like alot of work for the home builder for little benefit. i spose 5 star stills are so good everyone wants to be like them :handgestures-thumbupleft:

A couple progress pics..
A little bit of mucking around with the cone but pretty happy with it now.