Page 1 of 1
Corona Mill's are Here
Posted:
Thu Mar 04, 2021 6:41 pmby Andrew
Here it is the Wonderful, awesome, fantabulous Corona Mill.
We have a limited number, selling at a lower price than many around, just a low $59 will get one of these little wonders.
I’ll have them in the store some time tomorrow.
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 6:47 pmby RuddyCrazy
I not notice there isn't a top cover included for that corona mill and I did find when I left the cover off stuff went everywhere and made a mess :angry-banghead: So I put the top cover back in and everything just falls down :handgestures-thumbupleft: Now it would be easy to make a cover from a coffee can just need to find one the right size :handgestures-thumbupleft:
In the morning I'll take a pic of the cover on mine so it gives a good idea of it's shape etc.
Cheers Bryan
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 6:49 pmby Wellsy
We aren’t all muscle men like you Bryan, some of us might just slowly grind up the grain rather than going flat our :laughing-rolling:
You youngens are always full of testosterone and energy :laughing-rolling:
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 6:50 pmby The Stig
This is why I use cornflakes :laughing-rolling:
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 7:15 pmby RuddyCrazy
The Stig wrote:This is why I use cornflakes :laughing-rolling:
:laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: All of my CFW went into my last spirit run and never to be revisited as AG is just so bloody nice :obscene-drinkingchug:
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 7:27 pmby bluc
Could do ag ay cornflakes but cc way cheaper..
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 8:04 pmby Wellsy
CC s might be cheaper mate but only if you can resist eating them and getting them into the wash.
No point counting 3 bags as part of the wash if you ate 2 of the bags lol
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 8:17 pmby BigRig
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 8:31 pmby bluc
Wellsy wrote:CC s might be cheaper mate but only if you can resist eating them and getting them into the wash.
:laughing-rolling: cracked corn
No point counting 3 bags as part of the wash if you ate 2 of the bags lol
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 9:31 pmby RC Al
I have a version of this called a "Beatrice" that is close to 100 years old by the serial number, These units obviously will last a very long time, but if your going to hang a drill/motor off of it, I strongly recommend lubricating the apropriate bit (end of the shaft at the grinding end) with some butter or lard and paying attention to sideways loading to prevent premature wear.
Mmm mexican flavoured Cfw :))
Re: Corona Mill's are Here
Posted:
Fri Mar 05, 2021 11:28 pmby The Stig
RC Al wrote:I strongly recommend lubricating the appropriate bit (end of the shaft at the grinding end) with some butter or lard and paying attention to
OH MY GOD YOUR MAKING ME SO............. :law-policered: :law-policered:
Cold Shower Time , be right back :techie-typing: 8-} :crying-blue:
Re: Corona Mill's are Here
Posted:
Sun Mar 07, 2021 4:19 pmby RuddyCrazy
Ok Guy's,
Heres a pic of the guard on my corona mill
corn mill guard.jpg
Re: Corona Mill's are Here
Posted:
Sun Mar 07, 2021 6:44 pmby wynnum1
The Stig wrote:RC Al wrote:I strongly recommend lubricating the appropriate bit (end of the shaft at the grinding end) with some butter or lard and paying attention to
OH MY GOD YOUR MAKING ME SO............. :law-policered: :law-policered:
Cold Shower Time , be right back :techie-typing: 8-} :crying-blue:
Be careful what you put in your comments or will start to get some strange adds if do google search or on Facebook.
Re: Corona Mill's are Here
Posted:
Sun Mar 07, 2021 7:01 pmby The Stig
I never google lubrications :hand: