How much copper mesh for a column?

High performance modular SS304 plated columns and accessories.

How much copper mesh for a column?

Postby TheMechwarrior » Wed Apr 30, 2014 1:40 pm

All,

I'm putting together a taller 3" version of my 2" VM still and I'd like some guidance on the amount of FSD copper mesh I'll need for my 1500mm column?
My 2" has a 1200mm column for those interested in the comparison and pot scrubbers were a perfect fit for the 2".

Image
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: How much packing for a 3" x 1500mm column?

Postby MacStill » Wed Apr 30, 2014 2:14 pm

I just checked with a few off cuts I have lying around & rolled up a few different sizes, I've roughly calculated the amounts required for 100mm column length.

2" = 120g
3" = 230g
4" = 500g

It's only meant as a guide, it will vary a little depending how tight each person rolls it :handgestures-thumbupleft:
Last edited by The Stig on Tue Oct 20, 2020 7:27 am, edited 1 time in total.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: How much packing for a 3" x 1500mm column?

Postby TheMechwarrior » Wed Apr 30, 2014 3:39 pm

That's bloody awesome Mac, thanks :handgestures-thumbupleft:
TheMechwarrior
 
Posts: 1007
Joined: Mon Dec 05, 2011 1:43 pm
Location: Tasmania
equipment: Five Star Distilling 6" neutraliser with
100L boiler

Re: How much packing for a 3" x 1500mm column?

Postby Yummyrum » Wed Apr 30, 2014 6:27 pm

I'm a bit confused ....in the pic there is a rolled up "wad" for want of a better word .

Do you just keep pushing these rolled wads in against each other ? ....how long are they each ? Mac when you say 2" = 0.12kG ,is that per wad or for a fully packed column and if so what length

EDit : OK I think I got it ...the wad is 100mm long and weighs 0.12KG so for a 1 meter 2" column I would need 1.2KG worth
Last edited by The Stig on Tue Oct 20, 2020 7:28 am, edited 1 time in total.
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: How much packing for a 3" x 1500mm column?

Postby MacStill » Wed Apr 30, 2014 6:32 pm

Yummyrum wrote:
EDit : OK I think I got it ...the wad is 100mm long and weighs 0.1KG so for a 1 meter 2" column I would need 1KG worth


Yep that's it :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: How much packing for a 3" x 1500mm column?

Postby benmick6 » Sat May 17, 2014 6:31 pm

great help thanks. will order a 1kg roll when I get the elements.
Ben
benmick6
 
Posts: 51
Joined: Sun May 11, 2014 6:17 am
Location: spreyton, tasmania
equipment: 2 inch boka, 2 inch pot still, 50l keg boiler with 2.4 and 3.6kw elements

Re: How much copper mesh for a column?

Postby MacStill » Wed Dec 31, 2014 6:24 pm

We have received our new shipment of copper mesh, it's the exact same stuff we have always stocked that has a small amount of oil coating it that needs cleaning prior to use.

The deal with the oil free mesh fell through, but this gear is rated highly by those using it and is now available in our webstore :handgestures-thumbupleft:

I just need to update the product description ;-)
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: How much copper mesh for a column?

Postby danwbrews » Sat Mar 02, 2019 4:19 pm

I'm a newbie and this is my first build. I know this is an old post but I've been looking for it for days to find out about how much packing I need for my refux column .
Thanks for the info. I just got my #4 of copper mesh to pack my column. This will help me figure out how long to cut it.
This forum is so much better for finding information than all others. Ya'll are very clear (for the most part) and are hard core because of you're knowledge, but I have found that's because you care about the craft.
Thanks or being here.
danwbrews
danwbrews
 
Posts: 34
Joined: Sat Mar 31, 2018 9:45 pm
Location: Texas
equipment: I'm new to the hobby. I've been a beer brewer for 23 years. Building a CCVM still that can be used as a pot still when I want.
I have a 15 gallon Keg with 2 2000 W electric heaters. with a 2"potstill head 20" tall and a 2" shotgun condenser 20" long with four 1/2" condenser tubes. A 1.5 meter packed column is in the works.

Re: How much copper mesh for a column?

Postby Arismac » Sun Mar 03, 2019 7:12 pm

I use two rolls of firmly wound copper mesh and insert them into a T500 below the spirit outlet. This should give a total length of about 600mm (8 inches) of mesh in the column. I no longer use any saddles above the copper mesh.

I also double still the spirit and to produce a very good neutral spirit.

It is worth remembering that the mesh provides a far greater total area of copper than saddles or tubing. This means a far greater "extraction" surface for the sulphur per column length. Therefore directing the rising vapour through a density of copper mesh is probably the best answer for a reflux column.
Arismac
 
Posts: 382
Joined: Fri Mar 31, 2017 7:46 pm
equipment: none left


Return to 5 Star Distilling



Who is online

Users browsing this forum: No registered users and 21 guests

x