A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
by Bogdan » Mon Sep 04, 2017 11:39 am
Hi - I bought a power controller kit a few years ago and the SSR module has become unreliable.
The module is marked CRYDA CDSSR-1 VA2440.
Its a one of those devices with power across the 2 terminals on one side and a 560k ohm pot across the 2 terminals on the other side.
I realise I could buy a complete controller quite cheaply but this is built into a control box and the easiest thing would be to just replace the SSR.
I anyone knows of a replacement I would be extremely grateful
Graeme
-
Bogdan
-
- Posts: 3
- Joined: Sat Apr 20, 2013 7:30 pm
- equipment: pot still
by Sam. » Mon Sep 04, 2017 11:41 am
Is it still under warranty?
I would take it back to the manufacturer.
-
Sam.
- Lifetime Member
-
- Posts: 10405
- Joined: Sun Jul 17, 2011 7:19 pm
- Location: South Oz Straya
- equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.
by Peregian » Mon Sep 04, 2017 12:04 pm
Think you would be looking for a unit as described here....
http://www.auberins.com/index.php?main_ ... cts_id=353You can purchase on ebay etc. but there are inferior copies of quality products being sold so it would pay to check before buying.
-
Peregian
-
- Posts: 156
- Joined: Mon Jan 26, 2015 4:14 pm
- Location: Sunshine Coast
- equipment: Keg for boiler (element), Pot still head for stripping and a Nixon Stone offset head stainless still for spirit runs.
Return to Electrical Hardware
Who is online
Users browsing this forum: No registered users and 17 guests