Controller built
Posted: Sun Dec 12, 2021 8:17 pmGot this done.
All 240 was done or supervised by an electrician.
2 things. I got digital voltage gauges and they dim when the voltage drops and cuts out but the potentiometer still has about 1/4 of the turning circle left when at 0 volts
I'm using a b500k pot and ssr that wants a 470 - 500k pot.
Is this normal or do I need different pots.
Would rather have full control spread out over the whole distance rather than 1/2 the circle.
And I was going to get some analog voltage gauges but was thinking about maybe getting some amp gauges instead since I already have the digital voltage gauge. It's it worth putting them in or staying with volts only decided to put them in as the box has the room.
Just have to feed one of the incoming actives through the ct clamp must have missed one. So it doesn't read the power in the screen at the bottom
All 240 was done or supervised by an electrician.
2 things. I got digital voltage gauges and they dim when the voltage drops and cuts out but the potentiometer still has about 1/4 of the turning circle left when at 0 volts
I'm using a b500k pot and ssr that wants a 470 - 500k pot.
Is this normal or do I need different pots.
Would rather have full control spread out over the whole distance rather than 1/2 the circle.
And I was going to get some analog voltage gauges but was thinking about maybe getting some amp gauges instead since I already have the digital voltage gauge. It's it worth putting them in or staying with volts only decided to put them in as the box has the room.
Just have to feed one of the incoming actives through the ct clamp must have missed one. So it doesn't read the power in the screen at the bottom