5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchHey guys I've gathered a few parts ready to get assembled by my mate who's an electrician but before I get him around I thought I'd check with you guys to see if I've missed anything needed for the unit to work with my T500 boiler
I went with this for the reason it looks the better unit
http://www.auberins.com/index.php?main_ ... cts_id=444
I also got these as I was thinking of getting 2 setup or using a mix of all to make a good reliable unit
http://m.ebay.com.au/itm/331411112982?_ ... mwBanner=1
http://m.ebay.com.au/itm/181228222375?_ ... mwBanner=1
I've also got a fan on its way to help keep everything nice and cool
Cheers jake
Power controler assembly
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
1 post
• Page 1 of 1
Power controler assembly
by Jakev1988 » Wed Jun 03, 2015 9:16 am
- Jakev1988
- Posts: 27
- Joined: Wed May 13, 2015 7:55 am
- equipment: Brand new alembic still with turbo 500 boiler
Looking to build a reflux once I get established
1 post
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 58 guests