A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
by sagan » Sun Sep 13, 2015 2:32 pm
Anybody tried the linked? im running a single 2200w element so curious if this would do the job? Maybe mod it with a fan.
Just looking for my easiest option.
Hell i would pay someone local to bris to build me a controller ifmi knew anybody.
http://www.jaycar.com.au/Kits,-Science- ... t/p/KC5478
-
sagan
-
- Posts: 6
- Joined: Tue Jan 20, 2015 12:41 pm
- Location: Brisbane, QLD
- equipment: T500 Reflux
by rumdidlydum » Sun Sep 13, 2015 4:51 pm
:scared-eek: thats expensive.
Don't know how you would fit a fan in it?
-
rumdidlydum
-
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
by Doubleuj » Sun Sep 13, 2015 5:52 pm
Would that work? Even if you had to modify it with a fan some how like you said rum. If that works I'd pay the money
-
Doubleuj
- Lifetime Member
-
- Posts: 3630
- Joined: Fri Jan 16, 2015 7:15 pm
- Location: rockhampton qld
- equipment: 4" stainless glasser
by Doubleuj » Sun Sep 13, 2015 5:57 pm
Wait, it's not pre assembled. So you have to build it yourself anyway.
-
Doubleuj
- Lifetime Member
-
- Posts: 3630
- Joined: Fri Jan 16, 2015 7:15 pm
- Location: rockhampton qld
- equipment: 4" stainless glasser
Return to Electrical Hardware
Who is online
Users browsing this forum: No registered users and 36 guests