spirit maker still

A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.

"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"

the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.

Regards,

aussiedistiller team.

spirit maker still

Postby susie » Mon Oct 05, 2015 12:30 pm

Hi, I am new here so please excuse me if I am in the wrong area.

We have a spirit maker still that keeps re setting.
Would anyone know why its doing this?
susie
 
Posts: 22
Joined: Mon Oct 05, 2015 11:45 am
equipment: spirit maker

Re: spirit maker still

Postby Andy » Mon Oct 05, 2015 1:01 pm

what do you mean by resetting? and when is it doing this?
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: spirit maker still

Postby susie » Mon Oct 05, 2015 1:17 pm

It switches off at about 28c and we have to push the reset button.
This has happened the last two times we have used it
susie
 
Posts: 22
Joined: Mon Oct 05, 2015 11:45 am
equipment: spirit maker

Re: spirit maker still

Postby Andy » Mon Oct 05, 2015 1:33 pm

essentially the boiler is thinking that there is no liquid in the boiler. it switches off when it gets too hot to prevent damaging the element. the sensor could be on the fritz or the still could be struggling if its run in an already warm environment
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: spirit maker still

Postby susie » Mon Oct 05, 2015 1:39 pm

Thank you.
Do you know if and how the switch can be replaced ? are there any manuals that you know of ?
susie
 
Posts: 22
Joined: Mon Oct 05, 2015 11:45 am
equipment: spirit maker


Return to Electrical Hardware



Who is online

Users browsing this forum: No registered users and 43 guests

x