Lesgold’s inspiration

[Sam.]

Starting off to be a copy cat, why not good ideas are great to find.

Starting off a little bit poorer / harder off

IMG_20200613_153623.jpg

[chipboy]

Apologies, a typo Lesgold's, still exciting all he same.

Other thing to add is

Pot.jpg

Done with this

Cheap as chips and the real deal from the usual place

Holesaw.jpg

[Sam.]

Typo fixed mate, and that is one of the reasons that this forum is great is because members share their knowledge and experience freely :handgestures-thumbupleft:

[chipboy]

Thanks Sam, yes it is a good place to be, I bring my electrical engineering knowledge with me too!

Looks better already with the title fix-up

[Yonder]

What the holy fuck are you trying to communicate mate? I have no idea what the subject is nor what yer wonderful solution is. :wtf:

[The Stig]

No need to be so bloody rude mate.
I’ll try explain the situation as I see it.
Chip boy has been inspired to copy Lesgolds build, and unless I’m wrong , chip boy has found a cheap way of cutting holes.
And chip boy is offering his extensive electrical engineering knowledge with the group.
Happy now Yonder ?

[chipboy]

Absolutely correct, copying the design and doing what he did, just saying a big thanks to Lesgold personally as he permitted this to happen.

So this leads us to this

keg and pipes (2).jpg

Thank you all

[clintonb]

Cheap as chips and the real deal from the usual place

Sorry to ask a dumb question, is this ebay?


Thanks

Clinton

[The Stig]

Feel free to link the cutter chip boy

[chipboy]

Yes mate,

https://www.ebay.com.au/itm/15mm-100mm- ... 3076030975

the product is good (my opinion only), delivery quick. Order a few and dilute the postage.

Use cutting compound AND keep it slow always, pulse them if required. The smaller the diameter the quicker they will cut so be careful with them as going quickly will dull the tips quicker, no compound more so.

Regards

[mattyb]

Wicked just bought a few. So much cheaper

[WhiskeySour]

Looks good
The description on eBay says it comes with "tct hole saw with key". Is it safe to assume that this includes the arbor / pilot drill bit?

[chipboy]

Correct, each with its own spring arbor (good quality) and allen / hex key.

[Yonder]

Chip boy has been inspired to copy Lesgolds build, and unless I’m wrong , chip boy has found a cheap way of cutting holes.

Thank you, that makes sense now. :handgestures-thumbupleft:

[clintonb]

Yes mate,

https://www.ebay.com.au/itm/15mm-100mm- ... 3076030975

the product is good (my opinion only), delivery quick. Order a few and dilute the postage.

Use cutting compound AND keep it slow always, pulse them if required. The smaller the diameter the quicker they will cut so be careful with them as going quickly will dull the tips quicker, no compound more so.

Regards

Thanks mate :handgestures-thumbupleft:

[chipboy]

And a step forward,

Now for the shotgun, time to learn.

keg.jpg

[chipboy]

Next steps

pipes.jpg

Love those curves.

[Doubleuj]

:handgestures-thumbupleft: nice

[chipboy]

Free of a few of life's necessities I am back at it, here is today, thanks Lesgold!

There is a bit of heat to go into this to get it soldered. I hope it does not leak!