Ruddy's Glass Still

Pot still design and discussion

Re: Ruddy's Glass Still

Postby Wellsy » Fri Aug 27, 2021 9:05 pm

Good luck Bryan

You are definitely an ideas man, if it does not work at least you will be able to dig a hole. Hopefully it won’t fill with water :laughing-rolling:
Wellsy
Site Donor
 
Posts: 1246
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Ruddy's Glass Still

Postby The Stig » Fri Aug 27, 2021 10:43 pm

If it fills with water , he can fill it in and plant cabbage, they love water :teasing-neener:
The Stig
Site Nerd
 
Posts: 10049
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Ruddy's Glass Still

Postby RuddyCrazy » Sat Aug 28, 2021 10:16 am

G'Day Guy's,

Well due to working I didn't do any macerations :angry-banghead: so as my Quince ferment is finally done time do a few strip runs then a spirit run this arvo using the glass still.

So going a litre at a time it may take 3 or 4 runs to get enough low wines for the spirit run so this will be a good road test for this new setup :handgestures-thumbupleft:

Now as far as water goes whats the bet Wellsy put his pump on only to find he forgot to connect the hoses and is trying to shift the blame :laughing-rolling: :laughing-rolling: :laughing-rolling:
RuddyCrazy
Mentor
 
Posts: 1810
Joined: Thu Oct 31, 2013 6:36 pm
Location: Not far from Kanmantoo SA
equipment: 4" copper bubbler with a setup for Neutral and a thumper for Whisky and my old 5 litre pot for doing maceration runs and MiniMe the baby pot still also a 1-1/2" pot still and bubbler build happening

Re: Ruddy's Glass Still

Postby RuddyCrazy » Sat Aug 28, 2021 10:37 am

Just gotta throw in a pic guy's :laughing-rolling:

new setup.jpg


So looks like a day stripping while shaking my stubbie of dutch lager to keep a head :laughing-rolling: as it just starting to get moreish :laughing-rolling:

Cheers Bryan
You do not have the required permissions to view the files attached to this post.
RuddyCrazy
Mentor
 
Posts: 1810
Joined: Thu Oct 31, 2013 6:36 pm
Location: Not far from Kanmantoo SA
equipment: 4" copper bubbler with a setup for Neutral and a thumper for Whisky and my old 5 litre pot for doing maceration runs and MiniMe the baby pot still also a 1-1/2" pot still and bubbler build happening

Previous

Return to Pot Stills



Who is online

Users browsing this forum: No registered users and 3 guests

cron

x