FSD Pot Still

[Sam.]

Can't say I have actually measured the PC but I would say 500 or 600mm. At work so can't measure it.

I'm sure Mac could provide the specs tho.

The PC is 400mm long :handgestures-thumbupleft:

Thanks Mac! New it was near that :D

[1 2many]

Hmmm :think: I thought they were closer to 80. I will have to check next time i'm filling it up :handgestures-thumbupleft:

I know the keg I borrow off my mate for mashing and boiling is 80L :think:

Hey i may be wrong it is a visual thing side by side between the standard 50 ltr cub and the style of the bigger keg you have is the same as mine . But then i havn't measured mine either. :O)

[Sam.]

..... until I get a packed section for the bubbler and am happy with the product.

Did you order one of Mac's? The second I saw those and the new gin baskets I had my credit card out in a flash. :)

Yep :handgestures-thumbupleft: Wanted them as soon as I saw them too :D

[Sam.]

I would be amazed if you could get 80 litres into that boiler , If it is an 18 gallon (US) keg it would be 68 litres , A (UK)18 gallon keg is 80 ltr but i don't think that is what you have. ;-)

Well here is a pic of my boiler next to my mates keg that he uses for his BIAB, probably hard to see but the small piece of angle sticking out has the increments marked on it and 80L is well below the lip.

IMG_0940.JPG

Hard to call, but I will fill it up out of one of my marked big fermenters to make sure when I can :handgestures-thumbupleft:

[MacStill]

ooh oooh I have one of those 18 gallon (80 litre) kegs... it dwarfs my 15.5 gallon (50 litre) Coopers keg :dance: :happy-partydance: :dance:

[1 2many]

amazed I am . Seems as though mine might be the 67 litre job I will messier mine thanks for clearing that up Sam. :handgestures-thumbupleft: