Page 1 of 1
Lesgold’s inspiration
Posted:
Sat Jun 13, 2020 4:11 pm
by chipboy
Starting off to be a copy cat, why not good ideas are great to find.
Starting off a little bit poorer / harder off
IMG_20200613_153623.jpg
Re: Lespold's inspiration
Posted:
Sat Jun 13, 2020 4:18 pm
by chipboy
Apologies, a typo Lesgold's, still exciting all he same.
Other thing to add is
Pot.jpg
Done with this
Cheap as chips and the real deal from the usual place
Holesaw.jpg
Re: Lesgold’s inspiration
Posted:
Sat Jun 13, 2020 4:46 pm
by Sam.
Typo fixed mate, and that is one of the reasons that this forum is great is because members share their knowledge and experience freely :handgestures-thumbupleft:
Re: Lesgold’s inspiration
Posted:
Sat Jun 13, 2020 5:43 pm
by chipboy
Thanks Sam, yes it is a good place to be, I bring my electrical engineering knowledge with me too!
Looks better already with the title fix-up
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 3:45 pm
by Yonder
What the holy fuck are you trying to communicate mate? I have no idea what the subject is nor what yer wonderful solution is. :wtf:
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 3:49 pm
by The Stig
No need to be so bloody rude mate.
I’ll try explain the situation as I see it.
Chip boy has been inspired to copy Lesgolds build, and unless I’m wrong , chip boy has found a cheap way of cutting holes.
And chip boy is offering his extensive electrical engineering knowledge with the group.
Happy now Yonder ?
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 6:05 pm
by chipboy
Absolutely correct, copying the design and doing what he did, just saying a big thanks to Lesgold personally as he permitted this to happen.
So this leads us to this
keg and pipes (2).jpg
Thank you all
Re: Lespold's inspiration
Posted:
Sun Jun 14, 2020 6:46 pm
by clintonb
chipboy wrote:Cheap as chips and the real deal from the usual place
Sorry to ask a dumb question, is this ebay?
Thanks
Clinton
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 6:58 pm
by The Stig
Feel free to link the cutter chip boy
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 7:26 pm
by chipboy
Yes mate,
https://www.ebay.com.au/itm/15mm-100mm- ... 3076030975the product is good (my opinion only), delivery quick. Order a few and dilute the postage.
Use cutting compound AND keep it slow always, pulse them if required. The smaller the diameter the quicker they will cut so be careful with them as going quickly will dull the tips quicker, no compound more so.
Regards
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 8:25 pm
by mattyb
Wicked just bought a few. So much cheaper
Re: Lesgold’s inspiration
Posted:
Sun Jun 14, 2020 9:19 pm
by WhiskeySour
Looks good
The description on eBay says it comes with "tct hole saw with key". Is it safe to assume that this includes the arbor / pilot drill bit?
Re: Lesgold’s inspiration
Posted:
Mon Jun 15, 2020 5:36 am
by chipboy
Correct, each with its own spring arbor (good quality) and allen / hex key.
Re: Lesgold’s inspiration
Posted:
Mon Jun 15, 2020 3:28 pm
by Yonder
Chip boy has been inspired to copy Lesgolds build, and unless I’m wrong , chip boy has found a cheap way of cutting holes.
Thank you, that makes sense now. :handgestures-thumbupleft:
Re: Lesgold’s inspiration
Posted:
Mon Jun 15, 2020 10:25 pm
by clintonb
chipboy wrote:Yes mate,
https://www.ebay.com.au/itm/15mm-100mm- ... 3076030975the product is good (my opinion only), delivery quick. Order a few and dilute the postage.
Use cutting compound AND keep it slow always, pulse them if required. The smaller the diameter the quicker they will cut so be careful with them as going quickly will dull the tips quicker, no compound more so.
Regards
Thanks mate :handgestures-thumbupleft:
Re: Lesgold’s inspiration
Posted:
Mon Jun 22, 2020 7:57 pm
by chipboy
And a step forward,
Now for the shotgun, time to learn.
keg.jpg
Re: Lesgold’s inspiration
Posted:
Fri Jun 26, 2020 7:02 pm
by chipboy
Next steps
pipes.jpg
Love those curves.
Re: Lesgold’s inspiration
Posted:
Sat Jun 27, 2020 6:48 am
by Doubleuj
:handgestures-thumbupleft: nice
Re: Lesgold’s inspiration
Posted:
Tue Jan 26, 2021 1:45 pm
by chipboy
Free of a few of life's necessities I am back at it, here is today, thanks Lesgold!
There is a bit of heat to go into this to get it soldered. I hope it does not leak!