So with the need to spend some serious (serious to me anyway) dollars at FSD soon i need to sell my 2" so im thinking of adding a modular section to it before i put it up for sale.
wondering what people think would be best. Going to make a 4" section for the 2" before i sell it but throwing ideas around in my head and its time to ask what others think.
There is a 100mm 5 tube 2" RC 1/2" internals on the 2" pot/refulx hybrid. 500mm packed section or empty.
Got 150mm section of 4" i can spare and ill make reducers to get it from 2"-4" and back to 2".
My thoughts are;
i can either make a single 4" thumper with 130mm bath and have it hold 1L (after 2" Cap) so pot and inline thumper with RC setup, or
2 plate's, 100mm first plate to second plate distance and second to use last 50mm of 4" plus reducer and column above with 2 options.
. option 1: 50mm bath depth first plate, 25mm depth second plate
. option 2: 25mm bath depth both plates
Wondering what people would think would be best. Want to design it to be a single run for whoever ends up with it with best results and seperation that can be achieved, not a half arsed job.
Im leaning towards option 1, 50mm depth first plate 25mm second. Thinking this would have a better product output ABV and speed than option 2 or just a thumper all under a 100mm 2" RC which will be able to reflux no worries on bubbler.
what do people think, single inline thumper with RC, or 2 plates with RC with the option 1 or 2. Or other?
Cheers
WT