NevH wrote:Thanks WJ great post,
I put down a WBAB wash today. I have the same T500 still as you and will be making the same Mod's you suggested. I was thinking of running a stripping run first then a spirit run. Is this a good idea? And if so should I run my condenser with no packing?
Cheer nev
Professor Green wrote:Hey Nev,
many of us strip our washes before doing spirt runs; it's a very good strategy. Strip a couple of washes then combine the resulting low wines and put them through a single spirit run. You'll end up up with much better results than running the wash directly.
I would not recommend trying to strip with the T500 column though, it has plastic parts that will most certainly fail due to excessive heat and leave you still unusable.
Users browsing this forum: No registered users and 12 guests