Any ideas please

Any ideas please

Postby RobMichelle » Sun Oct 18, 2026 6:51 am

Hi all,
I have been making the same gin reciepe for a while now, same wash same botanical bill within a couple of points of grams, now the last 2 batches we have opened from august &september the gin is totally different, like flat gin I would call it, not floral on the nose like usuall, has any one else had this happen ?
I reuse wine bottles etc that have been in circulation for about a year rinsed after each emptying. I have notes on each run & bill and can’t find a discrepancy?
RobMichelle
Site Donor
 
Posts: 383
Joined: Sun Jun 09, 2024 10:53 am
Location: Western Vic
equipment: Airstill, FSD 2” PotStill, 35ltr digiboil , 3x30ltr fermenters, 2x110 ltrstainless steel fermenters, 1000ltr ibc for recirc water & 350w ozito dirty water pump.

Re: Any ideas please

Postby howard » Sun Oct 18, 2026 1:18 pm

i once left of bottle of gin 'open'. that is, with a speed pourer in it.
it lost all it's fragrance and was like drinking mildly flavoured water.
maybe the seal?
is your problem with different bottles from different runs.
ie is there some bottles from the same run that are ok?

this might involve some testing of course :o
howard
 
Posts: 575
Joined: Fri Jul 17, 2020 12:53 am
Location: perth
equipment: 35l brewzilla
2" modular CM
gin caddy
changeover element switch and voltage controller on brewzillas 1900w element.
5L glass boiler/glass leibig

Re: Any ideas please

Postby RobMichelle » Sun Oct 18, 2026 4:18 pm

Thanks Howard, wife and I are in the middle of this process now lol
I think it is left loose as some from the same batch still has it’s nice aroma whilst some doesn’t, we see how it ends up, well I’m sure I know how we are going to end up
RobMichelle
Site Donor
 
Posts: 383
Joined: Sun Jun 09, 2024 10:53 am
Location: Western Vic
equipment: Airstill, FSD 2” PotStill, 35ltr digiboil , 3x30ltr fermenters, 2x110 ltrstainless steel fermenters, 1000ltr ibc for recirc water & 350w ozito dirty water pump.

Re: Any ideas please

Postby RobMichelle » Sun Oct 18, 2026 4:48 pm

It does appear like it’s a seal problem, as same batch different bottles are ok and not ok it continues.
You do not have the required permissions to view the files attached to this post.
RobMichelle
Site Donor
 
Posts: 383
Joined: Sun Jun 09, 2024 10:53 am
Location: Western Vic
equipment: Airstill, FSD 2” PotStill, 35ltr digiboil , 3x30ltr fermenters, 2x110 ltrstainless steel fermenters, 1000ltr ibc for recirc water & 350w ozito dirty water pump.

Re: Any ideas please

Postby TheRealMrMessy » Sun Oct 18, 2026 5:19 pm

Some variation is natural but oxidation is all I'd have for what you describe, too.

Storage same or at least similar? As in, temperature, not in direct sunlight etc?
TheRealMrMessy
Site Donor
 
Posts: 384
Joined: Wed Jul 20, 2022 4:56 pm
Location: FNQ
equipment: 4" FSD Visualiser w/ lots of upgrades
4x60L Fermenters, 3x30L Fermenters, Brewzilla
2x Temp Controlled Fridges
4-tap Kegerator

Re: Any ideas please

Postby Stillsmith » Mon Oct 19, 2026 10:01 am

RobMichelle wrote:It does appear like it’s a seal problem, as same batch different bottles are ok and not ok it continues.

A cheese plater goes down well for munches with a couple of shots. :D
Stillsmith
Site Donor
 
Posts: 133
Joined: Sat Aug 22, 2026 9:07 am
equipment: 5 plate 4' bubbler

simple beer keg potstill6

Re: Any ideas please

Postby howard » Mon Oct 19, 2026 4:45 pm

RobMichelle wrote:It does appear like it’s a seal problem, as same batch different bottles are ok and not ok it continues.

that's a bit neater than my last tasting.
it was a waste of time too, nobody remembered anything :obscene-drinkingdrunk:
20251231_204017.jpg
You do not have the required permissions to view the files attached to this post.
howard
 
Posts: 575
Joined: Fri Jul 17, 2020 12:53 am
Location: perth
equipment: 35l brewzilla
2" modular CM
gin caddy
changeover element switch and voltage controller on brewzillas 1900w element.
5L glass boiler/glass leibig

Re: Any ideas please

Postby Stillsmith » Mon Oct 19, 2026 5:00 pm

howard wrote:
RobMichelle wrote:It does appear like it’s a seal problem, as same batch different bottles are ok and not ok it continues.

that's a bit neater than my last tasting.
it was a waste of time too, nobody remembered anything :obscene-drinkingdrunk:
20251231_204017.jpg

A cheese board is always the bomb while tasting.. :D
Stillsmith
Site Donor
 
Posts: 133
Joined: Sat Aug 22, 2026 9:07 am
equipment: 5 plate 4' bubbler

simple beer keg potstill6


Return to General Gin Chat



Who is online

Users browsing this forum: No registered users and 1 guest

x