Stainless steel bubbler

Perforated & bubble cap plated columns

Stainless steel bubbler

Postby Sam. » Thu Mar 08, 2012 11:22 pm

2 is enough in my book
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Stainless steel bubbler

Postby MacStill » Thu Mar 08, 2012 11:52 pm

This is Mark1, need to do a few improvements but all and all it came up ok.


Don't know if they work until I get one and see,I have ordered a sample as a trial to see the workmanship etc.


Lorry, my engineer friend laughed and said he could do better.
And so he did, the condensor on mine


We costed up all the parts and labour and just the two condensors came in at a whopping $1175.00 and thats before we even looked at the tower.
So mine is worth close to $2000


And yes I did have a drink with my Sis.


But it still looks nice and shiny and its mine,


Not hard to see your whole interest here is for financial gain, same story as the boilers you posted you had that weren't in your possession.

I will be honest,


Bullshit, let us know when your ready to start......
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Stainless steel bubbler

Postby emptyglass » Fri Mar 09, 2012 8:36 am

I havn't used any of Festers stuff, but it always looks good and is well thought out.
He obviously take his quality control seriosly.

The still pictured is not his work, I'm sure of it.

I think glow did have a drink with sis. Real men drink coke- straight.
emptyglass
 

Re: Stainless steel bubbler

Postby R-sole » Fri Mar 09, 2012 1:40 pm

The new bubblers from www.5stardistilling.com.au are much more exciting than that. Still able to take as manyplates away or add them though. Modular is the way to go.
R-sole
 
Posts: 0
Joined: Mon Apr 18, 2011 4:15 am
Location: Northern NSW Australia
equipment: Keg based pot stiller. 3" vm for occasionally making product for macerations and redistillation.

Re: Stainless steel bubbler

Postby Cane Toad » Fri Mar 09, 2012 2:41 pm

I think someone has done that before 5Star....just not on a commercial level :laughing-rolling: :laughing-rolling: :laughing-rolling: Just taking the piss outa you mate :laughing-rolling: :teasing-tease: :laughing-rolling:
You should post em over on HD,you know how much the ADORE that type of stuff :laughing-rolling: :laughing-rolling: :laughing-rolling: hey EG
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Stainless steel bubbler

Postby R-sole » Fri Mar 09, 2012 2:43 pm

Can't post over there mate. I was the first of the forced exodus :laughing-rolling: :laughing-rolling:

Pity they're members are the ones missing out on some really good tools to either help them build their own or to buy prefab gear.
R-sole
 
Posts: 0
Joined: Mon Apr 18, 2011 4:15 am
Location: Northern NSW Australia
equipment: Keg based pot stiller. 3" vm for occasionally making product for macerations and redistillation.

Re: Stainless steel bubbler

Postby Cane Toad » Fri Mar 09, 2012 4:18 pm

Yeah,well there may be a few smart ones that will SHOP elsewhere,it's funny how ....na shut up Don :teasing-tease: :teasing-tease: :teasing-tease:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Stainless steel bubbler

Postby MacStill » Fri Mar 09, 2012 4:23 pm

Big Don wrote:na shut up Don :teasing-tease: :teasing-tease: :teasing-tease:


Smartest thing you've posted yet.....

























:teasing-neener: :laughing-rolling: :teasing-tease: :laughing-rolling: :teasing-neener:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Stainless steel bubbler

Postby Cane Toad » Fri Mar 09, 2012 4:50 pm

Yeah but it hurts to be smart :crying-blue: :crying-blue: :laughing-rolling:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Stainless steel bubbler

Postby emptyglass » Fri Mar 09, 2012 10:52 pm

McStill wrote:
Big Don wrote:na shut up Don :teasing-tease: :teasing-tease: :teasing-tease:


Smartest thing you've posted yet.....


throat is so dry from laughing

You guys are a crack up.
emptyglass
 

Re: Stainless steel bubbler

Postby MacStill » Sat Mar 10, 2012 7:36 am

WineGlass wrote:
McStill wrote:
Big Don wrote:na shut up Don :teasing-tease: :teasing-tease: :teasing-tease:


Smartest thing you've posted yet.....


throat is so dry from laughing

You guys are a crack up.


It was just a demonstration for Glow on how to be honest :teasing-tease:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Previous

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 3 guests

x