Bubbler run tutorial video

Perforated & bubble cap plated columns

Re: Bubbler run tutorial video

Postby Maximus_Moonshine » Sat Oct 20, 2018 10:20 am

Great stuff Woodduck. Really enjoyed the vid and found it very informative. Thanks for taking the time and trouble to put that together. Would like to see more. For noobs like me I reckon a tour of the bubbler explaining each component, assembly, setup, options etc would be great.
Cheers!
Maximus_Moonshine
 
Posts: 27
Joined: Fri Aug 03, 2018 1:11 pm
Location: Near Beechworth, Victoria
equipment: Turbo 500 reflux and alembic pot

Re: Bubbler run tutorial video

Postby Jimmy. » Mon Oct 22, 2018 6:35 am

Any chance you can also go through the setup of the bubbler?
Do you run packed sections?
Jimmy.
 
Posts: 44
Joined: Mon Oct 15, 2018 6:25 am
equipment: still spirit 25l reflux still with column extension

Re: Bubbler run tutorial video

Postby woodduck » Mon Oct 22, 2018 6:49 am

If you click on the links (Glass duck, ducks nuts etc) right at the bottom of my signature below they will take you to my build threads which will show you the different configurations I use :handgestures-thumbupleft:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Bubbler run tutorial video

Postby crikko » Thu Oct 25, 2018 8:04 pm

Thanks Woodduck.

I've been wondering how these actually worked, the theory can only get you so far, and all the other videos I've found are about 2-3 minutes worth.

The only thing it hasnt helped with is my budget and being able to afford the upgrade. Can you do a video on that?
crikko
 
Posts: 64
Joined: Wed Apr 03, 2013 5:46 pm
equipment: Turbo 500 s/s

Re: Bubbler run tutorial video

Postby Rock » Thu Oct 25, 2018 8:15 pm

crikko wrote:Thanks Woodduck.

I've been wondering how these actually worked, the theory can only get you so far, and all the other videos I've found are

The only thing it hasnt helped with is my budget and being able to afford the upgrade. Can you do a video on that?


Yep that bloody purse string :text-lol:
Rock
 
Posts: 109
Joined: Tue Jul 03, 2018 12:32 pm
equipment: Turbo 500
FSD 4" x 5 plate bubble neutrilizer 600mm
Packed section.
50lt keg 2 x 2400 elements

Re: Bubbler run tutorial video

Postby woodduck » Thu Oct 25, 2018 9:00 pm

crikko wrote:The only thing it hasnt helped with is my budget and being able to afford the upgrade. Can you do a video on that?


Yep the old budget can go out the window pretty quick if your not careful but shop smart and you'll be surprised what you can put together. Scrap yards are often a good source of cheap copper. (Try find new stuff if you can just for safety sake) consider a non modular bubbler with a plate tree, less flanges and fittings.
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Bubbler run tutorial video

Postby Justillit » Tue Apr 04, 2023 7:36 pm

woodduck wrote:Hi guys,

I thought it might be of interest to some here if I did a video of one of my runs. I've tryed to explain how I go about it along the way. It's based on mac's "easy way to run a plated column".
http://aussiedistiller.com.au/viewtopic.php?f=36&t=2681

Just remember this is how I do it not how you must do it. It is a basic run strategy for a 4" 4 plate bubbler running on 2400w no controller. You can tweak your runs to suit you however you like but try master the simple before going crazy with different strategies. Keep it simple to begin with.

I hope it's of use to some of you. I have a few hiccups along the way so it shows you how to overcome some problems you may face while running a still.

Well enjoy :handgestures-thumbupleft:

https://youtu.be/cMKYjrCtlSo


Appreciate this @woodduck

Legend!
Justillit
 
Posts: 22
Joined: Wed Nov 10, 2021 3:44 pm
equipment: T500 Reflux and Alembic Pot

Previous

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 2 guests

x