by Jono » Mon Aug 12, 2019 12:16 pm
So after doing a bit of...ahem...reading :-B I have decided I will try out a stripping run. From what I've gathered:
1)Run it as hard as the condensor will let me with no packing and the take off wide open from the beginning.
2)Collect all the way down to 97-98 degrees vapour temp or 15-20%
3)Do several washes/stripping runs and add them altogether and dilute to 40% GL or less.
4) Do a spirit run with packing installed and full reflux for an hour. Take off foreshots/heads using lower power an then ramp up the power for hearts.
5) Once vapour temp starts to creep up slow it down a bit and change cuts jars more frequently until the funk starts getting too bad.
6)Air jars out for 24hrs and then do some :obscene-drinkingdrunk: [album][/album]
Does this sound correct?