Parrot build with Justlearning

Parrots beaks, valves, condensers, and all other hardware for stilling.

Parrot build with Justlearning

Postby Jono » Wed Jul 15, 2020 5:02 pm

Had my good friend Justlearning come over for a visit and we managed to knock up this parrot out of some scrap bits and pieces.
You do not have the required permissions to view the files attached to this post.
Last edited by Jono on Wed Jul 15, 2020 5:07 pm, edited 1 time in total.
Jono
 
Posts: 42
Joined: Mon Mar 25, 2019 7:47 pm
Location: Central Coast NSW
equipment: 50L Beer keg boiler with two 2.4kw elements, a 'unwelcome advertiser' controller, 2 inch Bokakob aka Billy Bob Boka and Jack the stripper a 2.5inch shell and tube condenser for pot mode or stripping... Building up to getting a 4 inch plate still

Re: Parrot build with Justlearning

Postby bluc » Wed Jul 15, 2020 9:23 pm

cool :handgestures-thumbupleft:
bluc
 
Posts: 7584
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Parrot build with Justlearning

Postby scythe » Thu Jul 16, 2020 4:38 am

Good idea on the cennection between the parrot and still.
Simple and effective i might do something similar.
scythe
 
Posts: 1735
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

Re: Parrot build with Justlearning

Postby Jono » Thu Jul 16, 2020 11:17 am

Yeah that was Justlearning's idea for that. It's not as pretty as a triclamp with a vent but it works for something that took us an hour or two to knock up! Also means it's not free standing so you can't accidentally knock it over.
Jono
 
Posts: 42
Joined: Mon Mar 25, 2019 7:47 pm
Location: Central Coast NSW
equipment: 50L Beer keg boiler with two 2.4kw elements, a 'unwelcome advertiser' controller, 2 inch Bokakob aka Billy Bob Boka and Jack the stripper a 2.5inch shell and tube condenser for pot mode or stripping... Building up to getting a 4 inch plate still

Re: Parrot build with Justlearning

Postby justlearning » Thu Jul 16, 2020 11:53 am

:handgestures-thumbupleft:
justlearning
 
Posts: 28
Joined: Tue Mar 12, 2019 9:14 am
Location: ACT
equipment: 2" Reflux Liquid Management with a window
Based on the Carriage Still on this site


Return to Accessories



Who is online

Users browsing this forum: No registered users and 3 guests

x