RC Al wrote:Welcome
The +reflux pot still is a great place to start :handgestures-thumbupleft:
I recommend seperating the water feeds to make power management much easier for you, it will have to be run really slowly as it sits. You will need pretty small valves on each exit to dial that in well.
Make mk2 PC from copper
I was wondering about separate controls for pre and post condensers. That said, yesterday I installed a 1/2 inch brass jumper style valve on the post condenser which can be dialed right down to a drip if needed.
Copper cond 3.JPG
I`ll take your advice and install a second valve on the pre-condenser. ^:)^
Cheer Al!
You do not have the required permissions to view the files attached to this post.