Pure Distilling Spirit Maker

Just starting out and need some advise? then post it in here.

Pure Distilling Spirit Maker

Postby ButchersStill » Wed Aug 11, 2021 10:55 am

Hi Everyone,

Been wanting to buy a still for a while and now am getting serious with lots of research.
I am wanting to do rums and whiskey mainly but eventually would want to end up with a 4 plate bubbler possibly with a gin basket option
I have been looking at the beginner kits and like the option of the Pure Distilling Spirit Maker over the T500
So my questions are
* Can the PD option be run as a pot still by turning off the reflux
* Can you add bubbler plates later to the PD option, I see you can add a triclover sight glass
* Do I really need the bucket filter that comes with the starter kit

* Should I just save a bit more and go straight to a 4 plate bubbler

Thanks in Advance
Andrew
ButchersStill
 
Posts: 10
Joined: Tue Aug 10, 2021 4:52 pm
equipment: Pure Distilling Spirit Maker Reflux Still
Pure Distilling Pot Still
Beer Me 30L Boiler
Home made 5L mini keg still with 2L mini keg thumper, home made liebig condenser

Re: Pure Distilling Spirit Maker

Postby BigRig » Wed Aug 11, 2021 11:24 am

ButchersStill wrote:Hi Everyone,

Been wanting to buy a still for a while and now am getting serious with lots of research.
I am wanting to do rums and whiskey mainly but eventually would want to end up with a 4 plate bubbler possibly with a gin basket option
I have been looking at the beginner kits and like the option of the Pure Distilling Spirit Maker over the T500
So my questions are
* Can the PD option be run as a pot still by turning off the reflux
* Can you add bubbler plates later to the PD option, I see you can add a triclover sight glass
* Do I really need the bucket filter that comes with the starter kit

* Should I just save a bit more and go straight to a 4 plate bubbler

Thanks in Advance
Andrew


Hi andrew welcome to the forum.

Short answer is no to all your questions.

The still you referring to is a boka still. It needs the condenser to knock down the vapour to a liquid for collection, without it the vapour will just escape the top vent.

The still will only be good for making neutral spirit. If u are wanting to use essense this is ok.

If u dont want to pay for a bubbler straight away speak to andrew @ 5 star about the 4" pot still which can grow in to a bubbler.

Forget the filter, do your cuts properly using good recipes and yeast and you will be fine.

Forget the turbo yeast.
BigRig
 
Posts: 768
Joined: Sun Apr 07, 2019 1:29 pm
Location: Brisbane, QLD
equipment: FSD 4" Mac SSG, 50L Milk Can, 2 x 2400w elements, 35L Digiboil Boiler, Airstill.

Re: Pure Distilling Spirit Maker

Postby warramungas » Wed Aug 11, 2021 8:18 pm

Welcome Andrew.
As above with the puredistiller jobbie.
However I did use my old 2" boka style as a pot still. Still need to run the cooling water with no column packing and collect everything that comes out though. A power controller made all the difference.
Having said that i had an oversized condensor and knew everything in my column could take the heat.
If you're keen on a 2" look at the 5* site as they sell a Boka for about the same price as the PD (without all the gimmicky kit stuff) in all stainless and Im sure you could probably run that pretty hard as well without worrying about melting something. Not a fan of pure stainless personally so might want to chuck a copper scrubber in there though.
The guys at 5* could probably assist.
Upgrading from 2" to 4" is like a revelation once you start running one though.
If you really want to take it seriously you can go the 4" pot and upgrade later as suggested before.
warramungas
 
Posts: 1436
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor Perth
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still

Re: Pure Distilling Spirit Maker

Postby Wellsy » Thu Aug 12, 2021 6:40 am

Hello Andrew
I went the 4 inch pot and 12 months later upgraded to the 4 inch bubbler and for me it was the perfect way to get into the hobby. Running the 4 inch pot taught me heaps about distilling as I had never done it before, now I am relearning with my bubbler but have a good knowledge base. To be honest I am not sure what would have happened if I went straight to the bubbler as there are extra variables when trying to get the flow rate right. Maybe I am slow lol
I also can’t recommend giving Andrew a call, there will be no pressure from him just straight forward honest advice.

Welcome to the forum and knowing what you want to produce is a great first step, ringing Five star will be another great step.
Wellsy
 
Posts: 2328
Joined: Sat Aug 22, 2020 7:48 am
Location: Victoria
equipment: FSD 4” Modular Pot Still plus 4 FSD Bubble plates on FSD 50 ltr Milk Can Boiler + 2 x 2400W FSD Element and Guard Kits

Re: Pure Distilling Spirit Maker

Postby southern45 » Thu Aug 12, 2021 10:21 am

ButchersStill wrote:1. Can the PD option be run as a pot still by turning off the reflux
2. Can you add bubbler plates later to the PD option, I see you can add a triclover sight glass
3. Do I really need the bucket filter that comes with the starter kit

4. Should I just save a bit more and go straight to a 4 plate bubbler


1. Essentially, no. I've got one of those PD Reflux stills, does a good neutral but it's a one-trick pony.
2. No again. They can't really be modified easily and I wouldn't bother trying.
3. No. I used it once when using their "clearing" products. Not necessary with sugar washes (search this site).

4. It really does depend! Bubblers are comparatively expensive, a little more complex and take up more room. They're far more versatile though and you can create anything from a quality neutral to a rum or whiskey. The PD Reflux is more compact and easy to use, but you'll only be making neutral spirit.

Another thing to consider is that with a bubbler, you'll be doing larger volume runs. It needs a 50+ litre boiler, whereas the PD Reflux can be paired to a 20-25L boiler. This is either a positive or negative, depending on your situation.


In my view (having gone through multiple still setups) I'd recommend starting with a 5 Star modular pot still on a 25L boiler.
southern45
 
Posts: 164
Joined: Mon Dec 10, 2018 2:50 pm
Location: Tasmania
equipment: Four plate 5-Star copper bubbler


Return to Beginners Questions



Who is online

Users browsing this forum: No registered users and 14 guests

x