6 Week Bubbler Challenge

Perforated & bubble cap plated columns

6 Week Bubbler Challenge

Postby Brendan » Mon Jan 21, 2013 10:58 pm

So i've decided to jump in head first, join everyone else and build myself a bubbler.

I have been making do with my 3" Pot and 3" VM and have perfected a nice vodka (in my opinion ;-) ), but as some of you may have seen I have put everything over the last 12 months into researching the production of a decent whisky, and in particular a Scotch-like single malt whisky.

I am in the middle of also setting up a bit of a brewery at home to deal with the All-Grain side of things, including my new mash tun with rotating sparge arm (wank factor :happy-partydance: ), but I will leave that for another thread when everything comes together.

Here i'll stick with the bubbler build, and seeing as I have a bit of downtime over the next 5 to 6 weeks, I have decided to set myself a challenge/timeline to motivate me to push through and get it finished. The timeline i've set is 6 weeks, which ends on Sunday 3rd March

I am planning to build the usual 4", 4 perforated plate bubbler, with each plate it's own modular section. The modularity I want for future proofing, so that I can both add or subtract plates, as well as make new plates and slot them in for experimental purposes.

This is obviously very common at the moment amongst a lot of us, and i'm not doing anything new, just collaborating people's ideas. But i'm a bloke with average tool skills, and if people can follow that over a timeline and relate it to themselves, I thought it might be interesting.

I figured i'll document it all like a diary and see how we go...i'll put up lots of pictures as they keep everyone interested.

Here goes nothing...
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: 6 Week Bubbler Challenge

Postby kelbygreen » Mon Jan 21, 2013 11:04 pm

haha nice brendan.

Race for the newcastle folk :teasing-neener: . I aint setting no time frame as if I had the money I prob be done in few weeks :)) Prob wouldnt have any ware to sleep as id be homeless :laughing-rolling:

good luck and if you need a hand with anything let me know (except condensers :angry-banghead: ) :roll:
kelbygreen
 
Posts: 191
Joined: Sat Sep 22, 2012 4:19 pm
Location: Newcastle
equipment: 3" pot

Re: 6 Week Bubbler Challenge

Postby Kimbo » Mon Jan 21, 2013 11:06 pm

We'll hold you to that mate ;-)
Make sure you post lotsa pics :handgestures-thumbupleft:
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: 6 Week Bubbler Challenge

Postby emptyglass » Mon Jan 21, 2013 11:09 pm

I wish you all the best on your quest Brendan. You have given yourself heaps of time, you should be kicking goals.

Make a good plan, and order your bits, and just hope everyones got it all in stock.

You will be on your way to bubbler bliss in no time.

Don't forget to ferment something to run through it. :handgestures-thumbupleft:
emptyglass
 

Re: 6 Week Bubbler Challenge

Postby Brendan » Mon Jan 21, 2013 11:18 pm

Day 1

This morning I headed down to the metal scrapyard. Thanks to Linny for the tip on where to go :handgestures-thumbupleft:

I went down and said I was chasing some copper pipe, and said a guy came on Friday and picked some up and told me that there was more 4" left over. The bloke goes "Oh you're a buildin a still too are ya" :laughing-rolling:

So at the right price, I raided what I thought I could use there. After buying from plumbing stores, and some from Reece on my last build, I learnt my lesson.

I picked up a nice big piece of 4" about 1800mm,
a 1600mm piece of 3" (don't even know if i'll use it, but after paying $200 for a piece on my first build, I was grabbing this at $30!),
also some long cuts of 1 1/2", 1", 3/4", 1/2".
Only thing I couldn't get was 2"...fairly important, but i'll keep looking.

Pipe1.JPG


Pipe2.JPG


And picked up a bottle of Mac's special juice ;-)

Pipe3.JPG


I also grabbed some goodies like the $39 Bunnings Dremel copy and cutting dics (thanks bt1 :handgestures-thumbupleft: ), as well as a cobalt 1.5mm drill bit for the plate holes.

Stuff.JPG


Will probably get myself some Map gas tomorrow with the ts8000 torch, as I think it's going to come in handy in certain areas (reflux condenser tubes :oops: )

I'll be into the shed this week, cutting these sections up and having a go at my first ezy flange :pray:
You do not have the required permissions to view the files attached to this post.
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: 6 Week Bubbler Challenge

Postby bt1 » Tue Jan 22, 2013 6:55 am

It's all happening,

I'd add one comment from mac...when you've had a gut full walk away for a while... funny like life, attitude determines the end result.

good luck you're off to a flyer


bt1
bt1
 
Posts: 2448
Joined: Sun Apr 22, 2012 11:56 am
Location: Adelaide
equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.

Re: 6 Week Bubbler Challenge

Postby blond.chap » Tue Jan 22, 2013 7:18 am

Nice one mate,
Originality be damned, we're here to make awesome booze not reinvent the wheel.

Few tips:
- Keep the receipt for the ozito tool, mine fell to pieces after a week (then bought a dremmel and it's awesome)
- I used about 10 cutting discs, and 5 1.5 drill bits
- If you end up getting a dremmel, this thing is very handy, really sped up the hole drilling for the plates:

http://www.dremel.com/en-au/attachments/Pages/ProductDetail.aspx?pid=220-01

What's your penalty clause for not making the deadline?
blond.chap
 
Posts: 877
Images: 0
Joined: Tue Aug 07, 2012 12:11 pm
Location: South Australia
equipment: Paris Stillton (4" perforated bubbler)

Re: 6 Week Bubbler Challenge

Postby kelbygreen » Tue Jan 22, 2013 1:56 pm

very nice brendan :handgestures-thumbupleft: You wont need cobalt drill for copper as they are made for hard metals, Although it prob last longer if you dont brake it
kelbygreen
 
Posts: 191
Joined: Sat Sep 22, 2012 4:19 pm
Location: Newcastle
equipment: 3" pot

6 Week Bubbler Challenge

Postby Sam. » Tue Jan 22, 2013 2:13 pm

You obviously know what you want.

Good luck making it in time.

+1 do you have a penalty for being late?
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: 6 Week Bubbler Challenge

Postby Brendan » Tue Jan 22, 2013 3:19 pm

blond.chap wrote:What's your penalty clause for not making the deadline?


Dammit, why did you have to mention that?!

Well apart from not having a bubbler :snooty: , I guess we'll have to come up with something... :think:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: 6 Week Bubbler Challenge

Postby blond.chap » Tue Jan 22, 2013 3:50 pm

A few suggestions:

- Confined to only making turbo wash with essences for a year
- 50 lashes
- Embarrassing signature and/or avatar
- Made to watch the entire Twilight series back to back
- General public ridicule
- Sacrifice your first born son
blond.chap
 
Posts: 877
Images: 0
Joined: Tue Aug 07, 2012 12:11 pm
Location: South Australia
equipment: Paris Stillton (4" perforated bubbler)

Re: 6 Week Bubbler Challenge

Postby punchy21 » Tue Jan 22, 2013 3:50 pm

All the best mate, you're off to an awesome start :handgestures-thumbupleft:

Brendan wrote:Only thing I couldn't get was 2"...fairly important, but i'll keep looking.


Is the 2" for the shotgun? That 3" would make meaty shottie, bit of overkill but you could compensate by shortening it a little... and it is spare??
punchy21
 
Posts: 619
Images: 0
Joined: Fri Nov 04, 2011 11:56 am
Location: South West
equipment: Modular 4" 4 plate Bubbler
6kW 50L Boiler

6 Week Bubbler Challenge

Postby BackyardBrewer » Tue Jan 22, 2013 4:58 pm

All your other suggestions are fine but this:
blond.chap wrote:confined to only making turbo wash with essences for a year


This is just cruel!!
BackyardBrewer
Site Donor
 
Posts: 1824
Joined: Thu Mar 22, 2012 1:18 pm
Location: South Aussie
equipment: Solid Copper Love Machine (Plated column bubbler), hand made with love by a forum member
50L keg boiler with 2 x 2400w elements
PURE distilling Reflux still + a tonne of homebrew gear amassed over 10 years of brewing.

Re: 6 Week Bubbler Challenge

Postby Linny » Tue Jan 22, 2013 5:03 pm

I spose you could take that 3" to a exhaust shop. bend it 180 degrees. ghetto style if your stuck
Linny
 
Posts: 1147
Joined: Thu Oct 11, 2012 8:46 pm
Location: Newcastle NSW
equipment: 4 Plate 3" Glass Bubbler - 50L Boiler
50L BIAB Temp Controlled Mash Tun

3" Carter Head Soon to Come

Re: 6 Week Bubbler Challenge

Postby Yummyrum » Tue Jan 22, 2013 5:48 pm

Good luck with you build Brendan.You're off to a flying start.

Wish we had a scrap dealer in Coffs that was so obliging.Thats and awesome deal :handgestures-thumbupleft: .Tried and get the "no mate we only buy not sell".

Three Bubble builds in Newcastle.Recon the words out and its supply and demand pricing at Midways :teasing-neener:
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: 6 Week Bubbler Challenge

Postby googe » Tue Jan 22, 2013 6:32 pm

. Good luck mate, looks like your very keen :handgestures-thumbupleft:
googe
 

Re: 6 Week Bubbler Challenge

Postby Brendan » Tue Jan 22, 2013 6:48 pm

blond.chap wrote:A few suggestions:

- Confined to only making turbo wash with essences for a year
Oh come on mate! Rather sacrifice first born
- 50 lashes
Harsh, but fair
- Embarrassing signature and/or avatar
Good idea
- Made to watch the entire Twilight series back to back
I've got a missus...have already endured this punishment :music-deathmetal:
- General public ridicule
Yeah?
- Sacrifice your first born son
If I have one anytime soon, it'll be up for grabs :violence-stickwhack:
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: 6 Week Bubbler Challenge

Postby Linny » Thu Jan 24, 2013 8:02 pm

Any progress ?
Linny
 
Posts: 1147
Joined: Thu Oct 11, 2012 8:46 pm
Location: Newcastle NSW
equipment: 4 Plate 3" Glass Bubbler - 50L Boiler
50L BIAB Temp Controlled Mash Tun

3" Carter Head Soon to Come

Re: 6 Week Bubbler Challenge

Postby Brendan » Fri Jan 25, 2013 12:42 am

So...I'm a fuckhead!

Trying to do Mac's easy flange, after being ready to throw it through the wall I realise its meant to be 1/4 inch tube, and I'm using 1/2 inch :angry-banghead: No wonder it looked massive.

Made up a little pipe flaring tool which saves on a lot of the hammering :handgestures-thumbupleft:

Got the modules and plates cut, and did a trip to Midway Metals to get stuff.

Just working on the easy flanges now...

Will put up a few pictures on the weekend.
Brendan
 
Posts: 2154
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: 6 Week Bubbler Challenge

Postby Sam. » Sat Jan 26, 2013 9:07 am

Brendan wrote:So...I'm a fuckhead!

Trying to do Mac's easy flange, after being ready to throw it through the wall I realise its meant to be 1/4 inch tube, and I'm using 1/2 inch :angry-banghead: No wonder it looked massive.

Made up a little pipe flaring tool which saves on a lot of the hammering :handgestures-thumbupleft:

Got the modules and plates cut, and did a trip to Midway Metals to get stuff.

Just working on the easy flanges now...

Will put up a few pictures on the weekend.


Yeah that has to suck :handgestures-thumbdown:

How about a pic of your flaring tool? :-B
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Next

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 2 guests

x