WTDist wrote:Good luck mate. Good to see people giving the unknown a go, like me 8-} My next goal after my T500 upgrade will be the boiler but that is in the distant future. Ill watch your progress and maybe learn a thing or two as well :handgestures-thumbupleft:
Zak Griffin wrote:Shiny!
Sounds like you've got it sussed mate. I'd put the thermo in the top of the boiler...
Are you going to leave the standard 2" ferrule, or add a 4" one?
Zak Griffin wrote:I'd go 4" all the way :handgestures-thumbupleft: talk to Mac, I'm sure you can get a 4" section (maybe an unpacked packed section module?) instead of a 2"-4" reducer. Puts you closer to your bubbler, and it'll be more stable.
Thermo port right in the top, next to the fill port... That way it'll be looking straight at you, you won't have to bend down to look at it.
WTDist wrote:I'm curious Potable. Your avatar pic, is that the dominoes with all the notches cut into them with high end grain? :think: or chocolate :laughing-rolling:
Also how much does a keg go for these days. i was having a look around on gumtree and saw one in nice condition in Logan brissy for $50
Zak Griffin wrote:Are you going to leave the standard 2" ferrule, or add a 4" one?
WTDist wrote:Zak Griffin wrote:Are you going to leave the standard 2" ferrule, or add a 4" one?
Slightly :text-offtopic: but...
I havent looked into kegs but i have seen a couple of vids on youtube about removing the middle thing but forgot all about it because that was in the distant future but... If i add a furrule to the bottom of my T500 can it be tri-clamped to the 2" keg as is? meaning no cutting or welding?
HillsJester wrote:$16.95 from FSD. Just need the original nut from T500 and then clamp away (clamp not included)
http://www.5stardistilling.net/adapter-t500/
Users browsing this forum: No registered users and 6 guests