copperhead road wrote:Call FSD and find out, you definitely know then :handgestures-thumbupleft:
bluc wrote:Go a shotty condenser not that much harder to make. And can be reused on a bubbler down the track. Trust us if you enjoy a drink you are gunna want better than a 2" pot. But a pot is a good way to learn..pot adapter is a 2" ferrule with a male thread and a backing nut..
Zak Griffin wrote:Pretty sure the boilers are the same mate.
The adapter screws into the lid and gives you a 2" triclamp ferrule to clamp your still onto.
Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all
ed9362 wrote:T 500 is a 25 liter boiler with a 50mm hole in the lid
Pure distilling is a 30l boiler with a 64mm hole in the lid.
They are no the same
mark84 wrote:Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all
Hey Swedish pride What size is your Liebig? I am assuming the bigger it is the less water needed to keep temp down
Swedish Pride wrote:mark84 wrote:Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all
Hey Swedish pride What size is your Liebig? I am assuming the bigger it is the less water needed to keep temp down
it's about 30" long 3/4 over 1/2, knocks down 5000w full throttre on a strip run, so a spirit run is a walk in a park.
Users browsing this forum: No registered users and 19 guests