bayshine wrote:Hey mate good score :handgestures-thumbupleft:
I found with mac's downcomers that the spear that I had removed from a keg fitted perfectly inside the downcomer when I was experimenting with different heights
Also looks like you may need a breather on your parrot to stop surging :-B
Johno86 wrote:Theres a few small things i can improve easily but for the price i couldnt pass it up. I would have loved a 5 star rig over anything but providing for a household of 5 on a slightly above average wage, it was just a dream lol
Professor Green wrote:Run with what you've got mate. Check it for vapour leaks on the maiden voyage - perhaps a vinegar run just to be safe.
You can always decouple the parrot from the condenser and stick a small funnel in the end to catch the drips. No breather required then. :handgestures-thumbupleft:
Cheers,
Prof. Green.
PeterC wrote:Very Nice, you need to rotate each second plate 180 degrees so the downcomers are not above each other.
Lowie wrote:PeterC wrote:Very Nice, you need to rotate each second plate 180 degrees so the downcomers are not above each other.
Why is that important PeterC? I have 2 of mine inline with each other - didn't plan it that way btw...
Cheers.
Return to Hardware Research & Development
Users browsing this forum: No registered users and 12 guests