Finally got around to getting my pot still together. I built it for stripping runs initially but once i get into the swing of things I'll run some rums through it (hopefully with some success)
It's built from 60mm copper, is 500mm tall (+/-) with a 400mm long 5 barrel .50 calibre shotgun condenser 8-) . I know that the shotgun condenser is over engineering for this but I built it simply as an exercise. I sometimes do things just to see if I can. To be honest I nearly smashed it against the wall two nights ago when after testing for watertight integrity (and passing) I fitted it to the column. On completion of the job I tested it again and the fucken thing was leaking so I had to pull it all apart again which made a mess of things. Anyway all done now.
Running a cleaning wash through her as I type.
Cheers, Heffers